TECTINTER Q103 Bluetooth Controller User Manual

TECTINTER Q103 Bluetooth Controller

Sonraíochtaí

• Múnla: Q103
• Comhoiriúnacht: Android 9.0+, iOS 13.0+, Windows 10+, Switch, PS3
• Nascacht: Bluetooth, 2.4G Wireless, USB (Type-C)
• Ag Obair Voltage: DC 3.7V
• Reatha Oibre: < 30mA
• Codladh Reatha: < 5uA
• Voltage/Reatha: DC 5V/500mA

Fabhtcheartú

• Rialaitheoir nach bhfuil ag ceangal:
  • Cinntigh go bhfuil an rialtóir luchtaithe go hiomlán.
  • Make sure the correct mode (X, V, S) is selected for your device.
  • Try re-pairing the controller by pressing the PAIR button and searching again on your device.
  • Cinntigh go bhfuil Bluetooth cumasaithe ar do ghléas.
  • For 2.4G mode, ensure the USB dongle is properly inserted.
• Cnaipí nach bhfuil ag freagairt:
  • Check if the controller is connected. The LED indicator should be solid.
  • Try resetting the controller (R3 + L3).
  • Test the controller in a different game or application.
• Readonly ionchuir:
  • Ensure you are within a reasonable range of your device (for Bluetooth/2.4G).
  • Íoslaghdaigh cur isteach ó ghléasanna gan sreang eile.
  • Try connecting via USB cable if available.
• Rialaitheoir gan luchtú:
  • Ensure the Type-C cable is securely connected to both the controller and a power source.
  • Bain triail as cábla Cineál-C nó oiriúntóir cumhachta difriúil.
  • The LED indicator should show the charging status.

C103 Léaráid fheidhmiúil

1. Cnaipe D-pad
2. Cnaipe X/Y/A/B
3. HOME Reconnect/Power Button
4. Cnaipe PAIR
5. ROGHNACH Cnaipe
6. Cnaipe TURBO
7. Cnaipe luamhán stiúrtha/L3 ar chlé
8. Luamhán stiúrtha ar dheis/Cnaipe R3
9. Cnaipe CLEAR
10. Cnaipe TÚS
11. L Cnaipe
12. Cnaipe L2
13. Port Muirearaithe Cineál-C
14. Cnaipe R2
15. Cnaipe R
16. Athshocraigh poll
17. stiúir
18. Athraigh Mód

Android / iOS / Windows/QUBE
Android 9.0 / iOS 13.0 / Win 10 agus os a chionn

Nasc Bluetooth

1. Smeach an lasc: Athraigh go X chun an modh X- INPUT a chur isteach.
2. An chéad úsáid (péireáil cumhachta):
   • Press the Pair button to start the pairing, and the LED will blink.
   • Turn on your device’s Bluetooth search and connect the Bluetooth device “Xbox Wireless Controller”.
   • Tá an stiúir dearg i gcónaí nuair a bhíonn an athcheangal rathúil.
3. Úsáid arís (Athcheangal):
   1. Press the HOME button to power on, and the LED will blink slowly.
   2. Tá an stiúir dearg i gcónaí nuair a bhíonn an athcheangal rathúil.
4. Press the PAIR button to power off the device.

Mód LASC

Nasc Bluetooth

1. Smeach an lasc: Athraigh go S chun dul isteach sa mhodh Athraigh.
2. An chéad úsáid (péireáil cumhachta):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) On the Switch console, select Controller
   → Change Grip/order to enter the Switch console pairing interface for pairing.
   Tá an stiúir glas i gcónaí nuair a bhíonn an athcheangal rathúil.
3. Úsáid arís (Athcheangal):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always green when reconnection is successful.
4. Press the PAIR button to power off the device.

ShootingPlus le haghaidh Android saor in aisce

Android 9.0 agus os a chionn

1. Flip the switch: Switch to V to enter the ShootingPlus mode. ( ShootingPlus App can be downloaded and installed in various mobile app markets.)
2. An chéad úsáid (péireáil cumhachta):
   a) Press the Pair button to start pairing, and the LED will blink.
   b) Turn on your device’s Bluetooth search and connect the Bluetooth device
   “Q103_ V3”
   a) Connection is successful.
3.  Úsáid arís (Athcheangal):
   a) Press the HOME button to power on, and the LED will blink slowly.
   b) The LED is always cyan when reconnection is successful.
4. Brúigh an cnaipe Péire chun an gléas a chumhachtú.

2.4G receiver mode

• 2.4G wireless connection operation method for PC devices / smart TVs / TV boxes / PS3 hosts/QUBE:
  1. Insert the 2.4G wireless receiver into a PC device/smart TV,/The USB interface of the TV box.
  2. Wave switch: Set to G mode for 2.4G mode.
  3. First use (power on pairing):
     a) Press the PAIR pairing button to start pairing. The LED blue light flashes rapidly,
     The connection is successful, and the LED blue light is constantly on
  4. The LED is always cyan when reconnected-
  5. First use (power on pairing):
     Press the HOME button to power on and reconnect; the LED flashes slowly.
     Successful reconnection, LED blue light stays on
  6. Press the PAIR pairing button to turn off the device
  7. You can start operating the games downloaded and installed on PC devices/smart TV/TV box/PS3 consoles/QUBE.

Uasghrádú firmware

1. Ceangail an V file to the Android phone ShootingPlus app for software upgrade.
2. Support USB wired upgrade

Socruithe luamhán stiúrtha

• Calabrú rocker
• Shake the joystick several times in the off state and then turn on the machine. Please do not touch the joystick when turning on the machine. The joystick will be automatically calibrated.
• Joysticks draw a square or a circle
•  + (default is circle).
• Note: The R3 Button is pressed with the Right Joystick.

Paraiméadair leictreacha

• Ag obair voltage: DC3.7V
• Sruth oibre: <30mA
• Reatha codlata: < 5uA
• Specification: DC5V/500mA
• Bluetooth transmission distance: <= 8M Battery capacity: 400mAh
• Am cúltaca: 30 lá (luchtaithe go hiomlán)

Charging / sleep/wake-up

1. When charging, the LED will blink slowly; When the battery is full, the LED will stay bright.
2. Feidhm codlata / múscail:
   In pairing state, the controller will sleep if it’s not paired successfully within 1 minute.
   Connect back state: The controller will sleep if it is not connected back within 1 minute.
   Bluetooth is connected: The controller will sleep if it is not used within 5 minutes.
   Press the Pair button to turn off the device. Short press the HOME button to directly reconnect.
3. If pairing is not successful within 1 minute, it will enter sleep mode.

Rabhadh CCFG

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, a nd can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cauharmful interferencec e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Atreoraigh nó athlonnaigh an t-aeróg glactha.
• Méadú ar an scaradh idir an trealamh agus glacadóir.
• Ceangail an trealamh isteach in asraon ar chiorcad atá difriúil ón gceann a bhfuil an glacadóir nasctha leis.
• Téigh i gcomhairle leis an díoltóir nó le teicneoir raidió/teilifíse a bhfuil taithí aige/aici chun cabhair a fháil.

Aire: D’fhéadfadh aon athruithe nó mionathruithe ar an bhfeiste seo nach bhfuil ceadaithe go sainráite ag an monaróir d’údarás chun an trealamh seo a oibriú a chur ar neamhní.
Comhlíonann an gléas seo cuid 15 de Rialacha CCFG. Tá an oibríocht faoi réir an dá choinníoll seo a leanas:

1. Ní fhéadfaidh an gléas seo a bheith ina chúis le cur isteach díobhálach, agus
2. Ní mór don ghléas seo glacadh le haon chur isteach a fhaightear, lena n-áirítear cur isteach a d’fhéadfadh oibriú gan iarraidh a chruthú.

Comhlíonann an trealamh seo teorainneacha nochta radaíochta FCC atá leagtha amach do thimpeallacht neamhrialaithe. Ba chóir an trealamh seo a shuiteáil agus a oibriú ar a laghad 0cm idir an radaitheoir agus do chorp.