Treoir Úsáideora don Phrintéir Mini TECH F21

TECH F21 Mini Printer

Sonraíochtaí

• Teicneolaíocht Priontála: Thermal printing (inkless)
• Cineál Priontála: Dubh & bán
• Cineál Páipéir: Rollaí páipéir teirmeacha
• Leithead an Pháipéir: 57 mm
• Rún Priontála: 203 pso
• Luas Priontála: Approx. 10–15 mm/s
• Nascacht: Bluetooth
• Gléasanna Comhoiriúnacha: Android, iOS
• Aipeanna le Tacaíocht: Dedicated mobile printing app (varies by region)
• Cineál Battery: ceallraí litiam rechargeable
• Cumas Battery: ~1000 mAh
• Modh Muirir: USB (Type-C or Micro-USB, model dependent)
• Vol Oibriúcháintage: 5V
• Ábhar: ABS plaisteach
• Méid: Compact / portable
• Meáchan: Lightweight (approx. 150–200 g)
• Supported Printing: Text, images, labels, QR codes, barcodes

Fabhtcheartú

Ní chasann an printéir air

• A chinntiú go ngearrtar an ceallraí.
• Bain triail as cábla USB difriúil nó foinse cumhachta.
• Press and hold the power button for 3–5 seconds.

Bluetooth gan nascadh

• Turn Bluetooth OFF and ON again on your phone.
• Cinntigh nach bhfuil an printéir ceangailte le gléas eile.
• Reinstall or update the printer app.
• Keep the printer within 1–2 meters during pairing.

Blank or unclear printing

• Check that thermal paper is loaded correctly (print side facing out).
• Use compatible thermal paper only.
• Clean the print head gently.
• Ensure battery level is sufficient.

Paper not feeding properly

• Reinstall the paper roll correctly.
• Avoid overloading the paper compartment.
• Remove jammed paper carefully.

App gan freagairt

• Dún agus athoscail an app.
• Check app permissions (Bluetooth, storage).
• Atosaigh do ghuthán.

Cúram agus Cothabháil

• Úsáid only recommended thermal paper to avoid print head damage.
• Keep the printer dry and away from heat or direct sunlight.
• Clean the print head periodically with a soft, dry cloth.
• Do not pull paper forcefully while printing.
• Charge the battery at least once every 2–3 months if not in use.
• Avoid dropping or applying pressure to the device.
• Store in a dust-free environment when not in use.

Loading PDF…

−+Fit width100%View FullscreenDownload PDFPrint PDF

×

Loading PDF…

Réamhrá Táirge

1.1 Liosta Pacála

O The quantity and specifications of the paper roll(s) are tailored to the package you’ve chosen.

1.2 Treoir Páirteanna Printéir

Tús a chur leis

2.1 Íoslódáil an App
Cuardaigh le haghaidh the “FaithTag” app on App Store@ or Google PlayTM for download and installation.

2.2 Treoir Úsáideora
O Before starting printing, please ensure that the paper roll is properly loaded into the paper compartment. For detailed instructions, refer to the manual section “3. Replacing the Paper Roll.”

Chun an printéir a chur ar siúl, brúigh fada an Cnaipe Cumhachta ar feadh trí soicind go dtí go mbeidh an Solas Táscaire ar siúl.
Open the “FaithTagAip. ”
Ceadanna a dheonú.
Click [Connect] on the top.
Connection complete. Tap the homepage to view scriptures.
View scripture details, then tap print.
Access preview, then tap [Print].
Tá an priontáil críochnaithe.
Stróic amach an lipéad feadh an Phaipéir Scoir.
Bain an cúltaca.
Greamaigh an lipéad ar dhromchla tirim, cothrom.

Is chun críocha tagartha amháin atá an comhéadan bogearraí. Féach ar an leathanach oibriúcháin iarbhír le haghaidh faisnéise cruinne.

An Rolla Páipéir a ionadú

Take out a brand new paper roll.
O Please skip this step if the paper roll you have is not newly purchased and boxed.
Push the Cover Open Button towards the arrow to take out the Paper RollSpindle.
Pull movable damper to remove the paper roll to be replaced.
Some paper rolls include tubes. Remove the paper tube after running out.
Insert one section of the spindle into the paper roll to be installed.
Reinstall the Movable Dampagus brúigh é go dtí imeall an rolla páipéir.
Bain an Greamán Frithscaoilte den rolla páipéir.
Cuir an rolla páipéir sa Roinn Páipéir.
Pull the Paper Roll out until it extends beyond the Paper Output Slot, and then close the Flip Cover.

Treoracha Sábháilteachta

5.1 Treoracha maidir le Gearrthóir Láimhe agus Ceann Priontála

Warning: Sharp edges on Manual Cutter! Do not touch the edges.
Warning: HOT component! Touching it when it is hot can cause burns to your fingers. Please wait for at least 30 minutes after turning off the power before touching it.

5.2 Treoracha Muirir
1. Please prepare your own power adapter (DC 5V/2A) with a Type-A port.
2. Insert the Type-C end (flat end) of the USB cable into F21’s Type-C Charger Port and plug the Type-A end (wide end) into the Type-A port of the power adapter.
3. After connecting and plugging in, please check the status of the printer indicator light. When the printer is charging, the indicator light will be flashing slowly with a “white light”.
4. Please charge for at least 20 minutes to meet quick usage; charging for 2-3 hours will complete the charging, or the following two states indicate full charge:when turned on, the indicator light stays “white”; when turned off, the light goes out.
5. As the printer may heat up during charging, avoid placing it on materials such as cotton or linen.
6. Once the battery is fully charged, please unplug the charger promptly.
O Avoid using the printer while charging.Using the printer while charging may lead to reduced charging speed, compromised print quality, and shortened battery life.

5.3 Glanadh agus Cothabháil
O Please make sure the printer is turned off before performing any cleaning or maintenance.
Má bhíonn fadhbanna agat amhail línte bána, prionta doiléir, nó carachtair ar iarraidh, d’fhéadfadh sé gur salachar ar an gCeann Priontála is cúis leis. Lean na céimeanna seo le do thoil:
If you have just finished printing, wait for at least 30 minutes for the Print

01 Head to cool down completely. Use a cotton swab dipped in alcohol or a print head cleaning pen (purchased
02 separately) to gently wipe the surface of the Print Head about 5 times to remove any dust and stains. Wait 5-10 minutes for the alcohol to evaporate completely. Thus, the cleaning
03 is done, and you can continue using the printer.

Eolas don Úsáideoir

6.1 RABHADH FCC
Comhlíonann an gléas seo cuid 15 de Rialacha CCFG.

Operation is subject to the ollowing two conditions:

(1) ní fhéadfaidh an gléas seo cur isteach díobhálach a chur faoi deara, agus
(2) ní mór don fheiste seo glacadh le haon chur isteach a fhaightear, lena n-áirítear cur isteach a d'fhéadfadh a bheith ina chúis le hoibriú neamh-inmhianaithe.

D’fhéadfadh aon athruithe nó modhnuithe nach bhfuil ceadaithe go sainráite ag an bpáirtí atá freagrach as comhlíonadh údarás an úsáideora chun an trealamh a oibriú a chur ar neamhní.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will be required to correct the interference at his own expense.

Tá meastóireacht déanta ar an bhfeiste chun ráiteas ginearálta nochta RF a chomhlíonadh.
Is féidir an gléas a úsáid i riocht nochta iniompartha gan srian.

6.2 FÓGRA EISIÚNTA (Ceanada)
- Béarla:
This device contains licence-exempt that comply with Innovation, Science and Economic Development Canada’ s licence-exempt RSS(s).

Tá an oibríocht faoi réir an dá choinníoll seo a leanas:

(1) Ní fhéadfaidh an gléas seo a bheith ina chúis le cur isteach.
(2) Ní mór don fheiste seo glacadh le haon chur isteach, lena n-áirítear cur isteach a d'fhéadfadh a bheith ina chúis le hoibriú neamh-inmhianaithe na feiste.

Ráiteas nochta IC RF:
Tá meastóireacht déanta ar an bhfeiste chun freastal ar riachtanas ginearálta nochta IC RF. Is féidir an gléas a úsáid i riocht nochta iniompartha gan srian.

WARNING Please pay attention to electrical safety. Do not disassemble, crush or puncture the battery. This product is not a toy.

Nótaí Speisialta
Glacann an chuideachta lánfhreagracht as athbhreithniú agus míniú an lámhleabhair seo, agus déanann sí a dícheall is mó chun a chruinneas a ráthú.
Nevertheless, please note that any technical improvements to the product may not be separately notified, and that the images of the product, accessories, software interfaces, etc. in this manual serve solely as illustrations and references. Due to product updates and upgrades, theactual product may vary slightly from the images. Please refer to the physical product for accurate representations.