Lámhleabhar Treorach Mótair Trolling Leictrigh HASWING Protruar G 3.0

1. Réamhrá

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your HASWING Protruar G 3.0 Electric Trolling Motor. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Fíor 1: Os a chionnview of the HASWING Protruar G 3.0 Electric Trolling Motor.

2. Faisnéis Sábháilteachta

Always prioritize safety when operating any marine equipment. Failure to follow these instructions may result in injury or damage to the product or vessel.

• Léigh na Treoracha go léir: Familiarize yourself with all features and operating procedures before use.
• Sábháilteacht Battery: Always connect the motor to a compatible 24V deep cycle battery system. Ensure proper polarity (+ to + and - to -). Disconnect battery power when the motor is not in use or during maintenance.
• Sábháilteacht an Liáin: Keep hands, feet, and clothing clear of the propeller at all times, especially when the motor is connected to power.
• Lasc Maraithe: Always use the provided kill switch lanyard. Attach it to yourself or the boat to ensure immediate power cut-off in an emergency.
• Coinníollacha Uisce: Operate the motor cautiously in shallow water or areas with submerged obstacles to prevent propeller damage.
• Aeráil: Ensure adequate ventilation around batteries to prevent accumulation of explosive gases.
• Páistí: Keep children away from the motor and controls.

3. Ábhar Pacáiste

Deimhnigh go bhfuil na míreanna uile i láthair sa phacáiste:

• HASWING Protruar G 3.0 Trolling Motor with 35.4-inch shaft
• Extendable Tiller Handle
• Transom Mount Bracket
• 3-Blade Propeller (11.8-inch diameter)
• Kill Switch Lanyard
• Crua-earraí Gléasta (scriúnna, leicneáin, cnónna)
• Lámhleabhar Treoraithe

Figure 2: Key components of the trolling motor, including the kill switch, battery meter, stepless speed control, foldable handle, bracket, durable motor, and anti-impact propeller.

4. Sonraíochtaí

5. Socrú

5.1 Gléasadh an Mhótair

The Protruar G 3.0 is designed for transom mounting. Follow these steps to securely attach the motor to your boat:

1. Position the transom mount bracket on the stern of your boat.
2. Déan an clamp screws on the bracket firmly to secure it to the transom. Ensure the motor is centered and stable.
3. Adjust the motor's shaft depth using the depth collar to ensure the propeller is submerged at the desired level, avoiding contact with the bottom or excessive splashing.
4. The motor offers 7 levels of tilting positions. Adjust the tilt to optimize performance and propeller depth.

Figure 3: Adjusting the motor's tilt for optimal operation.

5.2 Ceangal Battery

The Protruar G 3.0 requires a 24V power supply. This typically involves two 12V deep cycle batteries connected in series. The motor includes a 60A resettable inline fuse for protection.

1. Ensure the motor is OFF and the kill switch is disengaged before connecting batteries.
2. Connect the positive (+) terminal of the first 12V battery to the negative (-) terminal of the second 12V battery using a short jumper cable.
3. Connect the motor's positive (+) cable (red) to the remaining positive (+) terminal of the battery series.
4. Connect the motor's negative (-) cable (black) to the remaining negative (-) terminal of the battery series.
5. Déan gach nasc a dhaingniú go docht.

WARNING: Incorrect battery connection can cause severe damage to the motor and pose a safety hazard.

5.3 Láimhseáil Tionól

The tiller handle is extendable and foldable for convenience.

• To extend the handle, pull it outwards until it locks into position.
• To fold the handle, release the locking mechanism and fold it down. The handle can fold at angles of 0-100 degrees.

Figure 4: The tiller handle can be folded for storage or adjusted for comfortable operation.

6. Oibríocht

6.1 Cumhacht Ar Siúl/Múch agus Rialú Luais

The motor features digital stepless forward and reverse speed control directly from the tiller handle.

1. Attach the kill switch lanyard to the motor and yourself or the boat.
2. To engage forward motion, rotate the tiller handle clockwise. The further you rotate, the higher the speed.
3. To engage reverse motion, rotate the tiller handle counter-clockwise. The further you rotate, the higher the reverse speed.
4. To stop the motor, return the tiller handle to the neutral (OFF) position.

Figure 5: Digital stepless speed control for precise adjustments.

6.2 Táscaire Ceallraí

The motor head features a 5-level power display to indicate the battery's charge status.

• Monitor the display regularly to avoid unexpected power loss.
• Recharge batteries when the indicator shows low power.

Figure 6: The 5-level battery meter on the motor head.

6.3 Stop Éigeandála

The kill switch provides an immediate power cut-off for safety.

• In an emergency, pull the kill switch lanyard to instantly stop the motor.
• Always ensure the kill switch is properly engaged before starting the motor.

7. Cothabháil

7.1 Cúram an Liáin

The anti-impact propeller features a prop-clutch ability to prevent damage if it strikes an object.

• Regularly inspect the propeller for weeds, fishing line, or damage. Clear any obstructions.
• If the propeller is damaged, replace it with an authentic HASWING replacement propeller.
• Do not overtighten the propeller nut, as this can damage the motor if the prop strikes an object.

Figure 7: The prop-clutch mechanism helps prevent damage to the propeller and motor.

7.2 Glanadh agus Stóráil

• After each use, especially in saltwater, rinse the motor thoroughly with fresh water.
• Wipe down all surfaces to remove salt, dirt, and debris.
• Store the motor in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
• Disconnect batteries during long-term storage.

8. Fabhtcheartú

9. Barántas agus Tacaíocht

For warranty information, technical support, or replacement parts, please refer to the official HASWING websuíomh gréasáin nó déan teagmháil le do dhíoltóir údaraithe. Coinnigh d’admháil ceannaigh mar chruthúnas ceannaigh.