ELSYS EXT-Module Wireless Sensors
Sonraíochtaí
- Ainm Táirge: Modúl EXT
- Múnla: EXT-Module, Rev C
- Dáta Foilsithe: 29.04.2025
- Ionchur Voltage: Cumhacht sheachtrach isteach, 5-24V
- Aschur Voltage: On/off or 0-10V output
- Constant Output: 3.3V
- Aschur Reatha: Max 10mA @ 12V in, max 5mA @ 24V in
- Nascacht Gan Sreang: Compatible with ELT LoRa
Treoracha Úsáide Táirge
Suiteáil
- Ensure the ELT LoRa device is powered off before installing the EXT-Module.
- Insert the EXT-Module into the designated slot inside the ELT LoRa device.
- Connect external power input (5-24V) to the designated port on the EXT-Module.
- Make necessary connections for sensors or actuators as per your application requirements.
- Power on the ELT LoRa device and verify proper functionality of the EXT-Module.
Modhanna Úsáide
- The EXT-Module can be used in two primary modes.
- Class C Device: For connecting external power and actuators, set the EXT-Module accordingly.
- Class A Device: For connecting sensors, configure the EXT-Module to operate as a class A device.
Cumraíocht Aschuir
- The EXT-Module offers on/off or 0-10V output options. For 0-10V output, ensure the external power supply is at least 11V.
Nascacht Gan Sreang
- The EXT-Module is designed to wirelessly connect to the ELT LoRa device for seamless data transmission from sensors or actuators.
RÉAMHRÁ
- The EXT-module is a module that fits inside the ELT LoRa and is intended for connecting external power and actuators, and is used as a class C device. It can also connect to sensors and be used as a class A device.
Barr view
Gnéithe
- Ceangal le haghaidh cumhachta seachtracha
- Aschur ar/As
- Aschur 0 – 10 V
- General-purpose input
- Tá sé oiriúnach taobh istigh den bhosca ELT-2
- Cumhachtaíonn an ELT-2
- Switching between functions is done with jumpers.
Bun view
Sonraíochtaí
- Ionchur voltage: 5 – 24 V DC
- On/Off output: Uasmhéid 0.7 A
- Aschur 0 – 10 V: Uasmhéid 5 mA
- Is féidir ionchur a scála le suas le 50 V a cheadú
LÉARRAM WRING
- On/off or 0-10V output (for 0-10V, ext. power needs to be at least 11V)
- Cumhacht sheachtrach isteach, 5-24V
- Input to ELT LoRa. 10 or 50V range.
- Connect a 500 ohm resistor between the inputs for 4-20mA (10V range)
- Aschur tairiseach 3.3V. Uasmhéid 10mA @ 12V isteach, uasmhéid 5mA @ 24V isteach
- Electronic systems in Umeå AB Tvistevägen 48, 90736 Umeå, Sweden
- R-phost: eolas@elsys.se
- Web: www.elsys.se
- Tá sonraíochtaí sa doiciméad seo faoi réir a n-athraithe gan fógra.
- ©Electronic systems in Umeå AB 2023
Ceisteanna Coitianta
Cad é an t-uas-ionchur toirtetage supported by the EXT-Module?
The EXT-Module supports an input voltage range of 5-24V for external power sources.
How can I configure the EXT-Module for sensor usage?
To use the EXT-Module with sensors, set it to operate as a Class A device and make the necessary sensor connections as per the provided instructions.
Cad é an toirt aschuir moltatage for actuators?
The EXT-Module provides an on/off or 0-10V output option. For actuators, you can use either mode based on your requirements.
Doiciméid / Acmhainní
 |
ELSYS EXT-Module Wireless Sensors [pdfLámhleabhar Treoracha EXT-Module Wireless Sensors, EXT-Module, Wireless Sensors, Sensors |