KING LPWV2715-CT24 Vandal Resistant Heater Instruction Manual

1. Táirge Tharview

The KING LPWV2715-CT24 is a robust, vandal-resistant electric heater designed for high-traffic and public areas such as detention facilities, public restrooms, and rest areas. Its heavy-duty construction, including a 3/16-inch solid steel frame and grill, provides exceptional durability against impact and abuse. Tamper-resistant screws secure the grill, and controls are recessed to prevent unauthorized access. This unit offers moderate wattage and high airflow to effectively heat entryways and hallways, preventing drafts from affecting the building's core temperature.

Íomhá 1: Tosaigh view of the KING LPWV2715-CT24 Vandal Resistant Heater, showcasing its robust metal casing and grill.

Príomhghnéithe:

• Impact/Vandal Resistant: Constructed with a heavy grill and 3/16-inch solid steel frame.
• Pic-A-Watt Elements: Allows for multiple wattage options to suit specific heating requirements.
• Tamper Resistant 3 Position Switch: Offers Fan, Heat, and Off settings, designed to prevent unauthorized adjustments.
• Cosaint róthéamh: Integrated safety feature to prevent overheating.

2. Faisnéis Sábháilteachta

Read all instructions carefully before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Suiteáil Leictreach: This heater operates on 277 Volts and requires hardwiring. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.
• Bunús: This heater must be properly grounded to reduce the risk of electric shock.
• Suíomh: Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored or used. Maintain proper clearances from combustible materials as specified in the installation section.
• Cosaint róthéamh: The heater is equipped with a thermal cut-out to prevent overheating. If the heater shuts off due to overheating, allow it to cool down before attempting to restart. Investigate and correct the cause of overheating.
• Ná Clúdaigh: Never cover the heater or block its air inlets/outlets. This can cause overheating and fire.
• Cothabháil: Dícheangail an chumhacht sula ndéantar aon chothabháil nó glanadh.

3. Ábhar Pacáiste

Deimhnigh go bhfuil na comhpháirteanna uile i láthair agus gan damáiste nuair a osclaítear an pacáiste:

• KING LPWV2715-CT24 Vandal Resistant Heater Unit
• Mounting Hardware (typically included)
• Lámhleabhar Treoracha (an doiciméad seo)

Má tá aon earraí ar iarraidh nó má tá siad millte, déan teagmháil le do sholáthraí láithreach.

4. Suiteáil

RABHADH: Installation must be performed by a qualified electrician. Disconnect all power to the circuit at the main service panel before attempting any wiring.

4.1 Suíomh Gléasta

• This heater is designed for indoor, wall-mount installation.
• Choose a location that allows for proper air circulation and maintains required clearances from walls, ceilings, and floors. Refer to local codes for specific clearance requirements.
• Ensure the mounting surface is structurally sound to support the heater's weight (approximately 36 pounds).

4.2 Ceangal Leictreach

• The LPWV2715-CT24 heater requires a dedicated 277 Volt, 60 Hz, single-phase circuit.
• Tarraingíonn an téitheoir 5.4 Amps at 277V, providing 1500 Watts of heat. Ensure the circuit breaker and wiring are appropriately sized for this load.
• Connect the heater directly to the electrical supply using appropriate hardwiring methods and connectors, following the wiring diagram provided inside the heater's access panel.
• Cinntigh go bhfuil gach nasc daingean agus slán.

5. Oibríocht

Once properly installed and powered, the heater can be operated using its tamper-resistant 3-position switch.

5.1 Socruithe Athraigh Cumhachta

• AS: The heater is completely off, and no heat or fan operation will occur.
• FAN: The fan operates continuously without engaging the heating elements. This can be used for air circulation.
• TEASA: The heating elements and fan operate to provide warmth. The heater will cycle on and off to maintain the desired temperature if connected to an external thermostat (not included).

5.2 Wattage Selection (Pic-A-Watt)

The LPWV series heaters feature Pic-A-Watt elements, allowing for field-adjustable wattage settings. Refer to the wiring diagram inside the heater for instructions on how to adjust the wattage to suit specific room requirements. This adjustment should only be performed by a qualified technician with power disconnected.

6. Cothabháil

Regular maintenance ensures optimal performance and longevity of your heater. Always disconnect power at the circuit breaker before performing any maintenance.

• Glanadh: Glan taobh amuigh an téitheora go tréimhsiúil le clúdach bog, damp éadach. Ná húsáid glantóirí nó tuaslagóirí scríobach.
• Iontrálacha/Asraonta Aeir: Ensure that the air inlets and outlets are free from dust, lint, and other obstructions. Use a vacuum cleaner with a brush attachment to gently clean the grill and internal components if accessible.
• Cigireacht: Annually inspect the heater for any signs of damage, loose wiring, or unusual wear. If any issues are found, contact a qualified electrician for repair.

7. Fabhtcheartú

Sula ndéanann tú teagmháil le tacaíocht do chustaiméirí,view na saincheisteanna agus na réitigh choitianta seo a leanas:

If the problem persists after attempting these solutions, contact customer support or a qualified electrician.

8. Sonraíochtaí

9. Barántas agus Tacaíocht

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official KING websuíomh. Coinnigh d’admháil ceannaigh mar chruthúnas ceannaigh le haghaidh éilimh bharántais.

Monaróir: KING Electrical Manufacturing

Websuíomh: www.king-electric.com (exampan nasc, deimhnigh an t-oifigeach le do thoil websuíomh)