Eolas Tábhachtach Sábháilteachta
Please read and understand all instructions and safety warnings before assembly and use of this product. Failure to follow these instructions may result in injury or product damage.
- Do not attempt to lift or move the box spring when it is fully assembled.
- Lean na treoracha tionóil go cúramach i gcónaí chun éagobhsaíocht nó titim a chosc.
- Be cautious of sharp edges and the folding design during assembly and use.
- Regularly inspect the box spring for any signs of wear or damage.
- Ná sáraigh an toilleadh meáchain uasta de 3500 lb.
Ábhar an Phacáiste
Deimhnigh go bhfuil na comhpháirteanna uile i láthair sula dtosaíonn tú ar an tionól.
- Box Spring Frame Components
- Clúdach Fabraic
- Lámhleabhar Suiteáil
- Scriúnna
- Sreangán
Socrú agus Tionól
The MAF King Size Box Spring features a foldable design for easier setup. It is recommended that two adults assemble this product.
Uirlisí Riachtanach:
- Included Wrench
- (Optional) Power screwdriver for faster assembly
Céimeanna Tionóil:
- Díphacáil Comhpháirteanna: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Ensure all listed components are present.
- Dífhillte an Fráma: The box spring frame comes in a folded configuration. Gently unfold the sections as shown in the diagram below. Ensure the triangular support designs lock into place.
- Naisc Shlán: Align the frame sections and secure them using the provided screws and wrench. Ensure all connections are tightened securely to prevent wobbling or noise.
- Suiteáil Slata: Place the metal slats into their designated positions on the frame. The U-shaped groove design helps secure each pole and support frame.
- Cuir Clúdach Fabraice i bhFeidhm: Once the frame is fully assembled and stable, carefully place the removable fabric cover over the box spring. The cover is designed for easy application and removal.
Figure 1: Assembly Steps for the MAF Box Spring.
Figure 2: Foldable Design and Easy Assembly Overview.
Figure 3: Key Structural Features: Round Corners, Triangular Support, and U-Shaped Grooves.
Treoracha Oibriúcháin
The MAF Box Spring is designed to provide stable support for your mattress. It can be used with various mattress types, including innerspring, memory foam, and latex mattresses.
- Socrúchán: Position the assembled box spring on a compatible bed frame or directly on the floor if desired. Ensure it is level and stable.
- Socrú Tocht: Carefully place your mattress on top of the box spring. The box spring is designed to support mattresses up to 80"L x 76"W.
- Cumas Meáchan: The box spring is engineered to support up to 3500 lbs. Do not exceed this weight limit to maintain structural integrity and safety.
- Laghdú Torainn: The U-shaped groove design and seamless welding are intended to prevent structural distortion and squeaks, providing a quiet sleeping environment.
Figure 4: Proper Layering of Bed Components.
Cothabháil agus Cúram
Proper maintenance ensures the longevity and performance of your MAF Box Spring.
- Glanadh an Chlúdaigh: The fabric cover is removable and washable. Remove it from the frame for cleaning as needed. Follow care instructions on the cover label if available, or wash with mild detergent and cold water, then air dry.
- Glanadh Fráma: Cuimil an fráma miotail le héadach tirim chun deannach agus smionagar a bhaint. Seachain ceimiceáin ghéara nó glantóirí scríobacha a úsáid.
- Cigireacht Rialta: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Inspect the frame for any signs of bending, cracks, or damage.
- Moving the Box Spring: If you need to move the box spring, it is recommended to disassemble it first, especially if moving through narrow doorways or stairs, to prevent damage to the product or injury.
Fabhtcheartú
If you encounter any issues with your MAF Box Spring, refer to the following common solutions:
| Fadhb | Cúis Féideartha | Réiteach |
|---|---|---|
| Torann Screadach | Naisc scaoilte nó socrúchán míchothrom. | Ensure all screws are tightly secured. Verify the box spring is placed on a flat, level surface. The U-shaped groove design is intended to minimize noise; if squeaking persists, re-check assembly. |
| Éagobhsaíocht/Creathadh | Tionól neamhiomlán nó comhpháirteanna damáistithe. | Re-check all assembly steps, ensuring triangular supports are engaged and all fasteners are tight. Inspect for any bent or damaged parts. |
| Ag Laghdú Tocht | Exceeded weight capacity or improper mattress support. | Ensure the combined weight of users and mattress does not exceed 3500 lbs. Verify the mattress is compatible with a box spring. |
Sonraíochtaí
| Gné | Sonraigh |
|---|---|
| Branda | MAF |
| Uimhir Mhúnla | MAF-MT33-10K |
| Méid | Rí |
| Toisí Táirge | 78.8"F x 75.5"L x 10"A |
| Méid Tocht Comhoiriúnach | 80"F x 76"L |
| Gné Speisialta | Foldable Design, Round Corner Design, Triangular Support, U-Shaped Groove Design |
| Cineál Críochnaigh | Púdar Brataithe |
| Comhpháirteanna San áireamh | Box Spring Frame, Fabric Cover, Installation Manual, Screws, Wrench |
| Treoracha Cúram Táirge | Wipe with Dry Cloth, Removable and Washable Fabric Cover |
| Tionól de dhíth | Tá |
| Fad ón Talamh go dtí an Mír | 10 Orlach |
| Meáchan Mír | 49.1 punt |
| Cumas Meáchan uasta | 3500 lb |
Figure 5: MAF Box Spring Size Chart.
Barántas agus Tacaíocht
Specific warranty details for the MAF Box Spring are not provided within this manual. For warranty information, please refer to the product packaging or contact MAF customer support directly.
For further assistance, questions, or to report any issues, please visit the official MAF store or contact their customer service department.