Atlanta Digital LED Alarm Clock 2604/0 User Manual

Réamhrá

Thank you for choosing the Atlanta Digital LED Alarm Clock, Model 2604/0. This alarm clock features a large, continuously illuminated white LED display, adjustable brightness, two separate alarms with crescendo function, and a convenient USB charging port. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance of your device.

Socrú

1. Ceangal Cumhachta

Connect the provided power adapter to the DC5V port on the back of the alarm clock. Plug the adapter into a standard 230V electrical outlet. The clock requires a permanent power connection for full functionality.

Image: The Atlanta Digital Alarm Clock shown with its included power adapter and USB connection cable.

2. Cúltaca Ceallraí

The alarm clock includes an integrated CR2032 button cell battery (1 CR2032 - included). This battery serves as a backup to protect programmed data (time and alarm settings) in case of a power outage. It does not power the display or alarm functions independently.

Íomhá: Cúl view of the alarm clock, highlighting the battery compartment, DC5V input, USB port, and control buttons/sliders.

Treoracha Oibriúcháin

1. An t-Am a Shocrú

1. Brúigh agus coinnigh an SET AMA button (located on the right side of the back panel) for 2 seconds until the display flashes.
2. Bain úsáid as an 12/24HR button (left side of the back panel) to adjust the hours.
3. Brúigh an SET AMA cnaipe arís chun aistriú go coigeartú nóiméad. Úsáid an 12/24HR cnaipe chun na miontuairiscí a choigeartú.
4. Brúigh an SET AMA cnaipe arís chun a dhearbhú agus imeacht ón modh socraithe ama.

To switch between 12-hour and 24-hour display formats, briefly press the 12/24HR button when not in time setting mode.

Image: Front display of the alarm clock showing the time "12:50 PM".

2. An Aláram a Shocrú

The clock supports two separate alarms.

1. Brúigh agus coinnigh an TACAIR ALARM button (located on the right side of the back panel, below TIME SET) for 2 seconds until the alarm time flashes.
2. Bain úsáid as an 12/24HR cnaipe chun uaireanta an aláraim a choigeartú.
3. Brúigh an TACAIR ALARM cnaipe arís chun aistriú go coigeartú nóiméad. Úsáid an 12/24HR cnaipe chun nóiméid an aláraim a choigeartú.
4. Brúigh an TACAIR ALARM button once more to confirm and exit alarm setting mode.
5. To activate or deactivate an alarm, briefly press the AL. ON/OFF button (left side of the back panel, below 12/24HR). An indicator on the display will show if the alarm is active.

The alarm features a Corrán function, meaning the alarm sound starts softly and gradually increases in intensity.

3. Feidhm Snooze

Nuair a chloiseann an t-aláram, brúigh an cnaipe mór snooze button on the top of the clock. This will temporarily silence the alarm for 5 minutes. The alarm will resume after 5 minutes.

4. Coigeartú Gile Taispeáin

Adjust the display brightness using the DIMMER slider located on the back panel. Slide it from "LOW" to "HIGH" to achieve your desired brightness level. The brightness is continuously adjustable.

5. Alarm Volume Adjustment

Adjust the alarm sound volume using the TOIRT slider located on the back panel. Slide it from "LOW" to "HIGH" to set the desired alarm volume. The volume is continuously adjustable.

6. Port luchtaithe USB

A USB port is located on the back of the alarm clock. You can use this port to charge other devices, such as a mobile phone. Connect your device's USB charging cable to this port.

Cothabháil

• To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Coinnigh an gléas ar shiúl ó uisce agus taise ard.
• Avoid exposing the clock to direct sunlight or extreme temperatures.
• If the backup battery needs replacement, ensure to use a CR2032 type battery.

Fabhtcheartú

Display is too bright or too dim:

Coigeartaigh an DIMMER slider on the back panel. While the brightness is continuously adjustable, some users may find the minimum brightness still too high for a dark bedroom.

Clock loses time or settings during a power outage:

Ensure the CR2032 backup battery is correctly installed and functional. The backup battery preserves settings but does not power the display or alarm during an outage. If the battery is old or depleted, replace it.

Ní chloiseann an t-aláram:

• Check if the alarm is activated using the AL. ON/OFF button. An indicator should be visible on the display.
• Cinntigh an TOIRT slider is not set to "LOW" or minimum.
• Verify that the alarm time is set correctly.

USB charging port not working:

Ensure the alarm clock is properly connected to a power source. The USB port requires the clock to be powered. Check the charging cable of your device.

Sonraíochtaí

Barántas agus Tacaíocht

For warranty information or technical support, please refer to the documentation provided with your purchase or contact your retailer.