LEDVANCE 65636

Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual

Samhail: 65636 | Branda: LEDVANCE

Eolas Tábhachtach Sábháilteachta

  • Úsáid Laistigh Amháin: This product is designed for indoor use in dry locations. Do not expose to water or high humidity.
  • Sábháilteacht Leictreach: Cinntigh go bhfuil an t-oiriúntóir cumhachta ceangailte le hasraon cumhachta oiriúnach. Ná cuir ró-ualach ar chiorcaid leictreacha.
  • Treoracha Gearradh: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
  • Suiteáil: Déan an chumhacht a dhícheangal i gcónaí roimh shuiteáil nó cothabháil.
  • Teas: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
  • Páistí: Coinnigh an táirge agus a chomhpháirteanna as aimsiú leanaí.

Ábhar an Phacáiste

Deimhnigh go bhfuil na comhpháirteanna uile i láthair i do phacáiste:

  • (2) 16.4ft RGB Flexible LED Light Strips
  • (1) Soláthar Cumhachta
  • (1) IR Remote Controller (with battery included)
  • (20) Gearrthóga Gléasta
Sylvania 32ft RGB Flexible Light Strip Starter Kit components

Image: Main product image showing the light strips, remote, power adapter, and clips.

Socrú agus Suiteáil

  1. Ullmhaigh an Dromchla: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
  2. Comhpháirteanna Ceangail: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
  3. Feidhmiúlacht Tástála: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
  4. Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
  5. Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
  6. Gníomhachtaigh Cianda: Remove the plastic tab from the remote control's battery door to activate the battery.
Diagram showing connection, cutting points, and mounting of LED strips

Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.

Oibríocht

The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.

Feidhmeanna Cianrialaithe:

  • AR/AS: Power the light strips on or off.
  • Roghnú Dathanna: Choose from 16 static colors using the color buttons.
  • maolú: Adjust the brightness of the selected color or dynamic mode.
  • Modhanna Dinimiciúla: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Diagram of the IR remote control with labeled buttons for colors and modes

Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.

Cothabháil

  • Glanadh: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
  • Saolré: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
  • Athsholáthar Cadhnraí cianda: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.

Fabhtcheartú

FadhbCúis FéidearthaRéiteach
Ní chuireann soilse ar siúl.Power connection issue, remote battery dead, IR receiver blocked.Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction.
Ní fhreagraíonn cianrialú.Remote battery dead, remote too far, IR receiver blocked.Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver.
Some sections of the light strip are not lighting up.Damaged section, incorrect cutting.Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure.

Sonraíochtaí

GnéSonraigh
Uimhir Mhúnla65636
BrandaLEDVANCE (Sylvania)
DathRGB (16 colors) + White
Fad32ft (2 x 16.4ft strips)
ÚsáidLaistigh Amháin
Gnéithe SpeisialtaColor Changing, Dimmable, Energy Efficient
Cineál Foinse Solaisstiúir
Foinse CumhachtaCorded Leictreach
Cineál RialaitheoraIR Cianrialú
Imltage12 Volta
Wattage24 vata
NascachtInfridhearg
ÁbharPlaisteach
Meáchan Mír10.88 unsa
SaolréSuas le 30,000 uair an chloig
Friotaíocht UisceGan Frithsheasmhach in Uisce
UPC046135656361

Barántas agus Tacaíocht

This Sylvania LED Flexible Light Strip Starter Kit is backed by a Barántas monaróra 1 bhliain.

For technical support, warranty claims, or additional product information, please visit the official LEDVANCE webláithreán gréasáin nó déan teagmháil lena rannóg seirbhíse do chustaiméirí.

Is féidir leat cuairt a thabhairt freisin ar an Siopa LEDVANCE ar Amazon le haghaidh tuilleadh táirgí agus eolais.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.