LEDVANCE Linear LED Shelf Light 400mm

1. Réamhrá

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Léigh an lámhleabhar seo go cúramach roimh an suiteáil agus coinnigh é le haghaidh tagartha sa todhchaí.

2. Treoracha Sábháilteachta

• Sábháilteacht Leictreach: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Úsáid Beartaithe: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Rátáil IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Foinse Solais: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Láimhseáil: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Glanadh: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Ábhar Pacáiste

Deimhnigh go bhfuil na comhpháirteanna uile i láthair sula dtosaíonn tú ar an suiteáil:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Gabhálais ceangail

4. Sonraíochtaí

Nóta: Tá sonraíochtaí faoi réir a n-athraithe gan fógra.

5. Socrú agus Suiteáil

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Ullmhaigh an Limistéar Suiteála: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Cumhacht a Dhícheangal: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Marcáil Pointí Druileála: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Poill Druileála: Druileáil poill ag na pointí marcáilte ag baint úsáide as giotán druileála oiriúnach do d’ábhar balla. Cuir na plocóidí balla atá ar fáil isteach sna poill druileáilte.
5. Ceangail Lúibíní Gléasta: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached.
6. Ceangal Leictreach: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Suiteáil an Daingneán: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Athchóirigh Cumhacht: Nuair a bheidh an daingneán suiteáilte agus sreangaithe go daingean, athbhunaigh an cumhacht ag an bpríomhbhriseoir ciorcaid.

6. Treoracha Oibriúcháin

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Oibríocht Uathoibríoch: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Múchadh Uathoibríoch: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Socrúchán Braiteoir: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Cothabháil

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Glanadh: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or sprays directly on the fixture.
• Cigireacht: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Foinse Solais: The LED light source is integrated and not user-replaceable. If the light source fails, the entire fixture must be replaced.

8. Fabhtcheartú

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• Ní Lasann an Solas:
  • Seiceáil an bhfuil an soláthar cumhachta ceangailte agus an bhfuil an scoradán ciorcaid ar siúl.
  • Cinntigh go bhfuil na naisc sreangaithe slán.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• Fanann an solas ar siúl go leanúnach:
  • Ensure there is no continuous motion within the sensor's detection range.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Splancacha nó Briseadh Solais:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Cinntigh an toirttage supply is stable and within the specified range (240V).

If these steps do not resolve the issue, contact customer support.

9. Barántas agus Tacaíocht

This LEDVANCE Linear LED Shelf Light comes with a Ráthaíocht 2 bliana ón dáta ceannaigh, ag clúdach lochtanna in ábhair agus i gceardaíocht faoi ghnáthúsáid.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.