PIX LINK 2800M WiFi Repeater User Manual

Réamhrá

Welcome to the user manual for your PIX LINK 2800M WiFi Repeater. This device is designed to extend the range of your existing wireless network, eliminating Wi-Fi dead zones and providing a stronger, more reliable signal throughout your home or office. Please read this manual carefully before using the device.

Eolas Sábháilteachta

• Ná nocht an gléas d'uisce nó do thaise.
• Ná déan iarracht an gléas a dhíchóimeáil nó a dheisiú tú féin.
• Ná húsáid ach an t-oiriúntóir cumhachta a sholáthraíonn nó a mholann an monaróir.
• Coinnigh an gléas ar shiúl ó fhoinsí teasa agus solas díreach.
• A chinntiú go bhfuil aeráil cheart timpeall an fheiste chun róthéamh a chosc.

Ábhar an Phacáiste

• 1 x PIX LINK 2800M WiFi Repeater
• Cábla Ethernet 1 x
• 1 x Treoir Suiteáil Thapa

Táirge Tharview

The PIX LINK 2800M WiFi Repeater features four external antennas for enhanced signal coverage and stability. It supports multiple operating modes to suit various networking needs.

Taispeánann an íomhá seo an tosaigh view of the PIX LINK 2800M WiFi Repeater. It is a white rectangular device with four adjustable external antennas, two on each side. The front panel displays the "2800M" model number and "Wi-Fi" logo.

Socrú

Socrú Mód Athsheoltóra

1. Plug the repeater into a power outlet near your existing router.
2. Wait for the power indicator light to stabilize.
3. On your computer or mobile device, connect to the repeater's default Wi-Fi network (e.g., "PIXLINK_XXXX").
4. Oscail a web brabhsálaí agus cuir isteach an seoladh IP réamhshocraithe (m.sh., 192.168.1.254) or domain name (e.g., ap.socrú).
5. Logáil isteach ag baint úsáide as an ainm úsáideora agus an focal faire réamhshocraithe (de ghnáth riarthoir/riarthoir).
6. Follow the on-screen wizard to select "Repeater Mode".
7. Choose your existing Wi-Fi network from the list and enter its password.
8. Configure the repeater's Wi-Fi name (SSID) and password, or keep them the same as your main network.
9. Save the settings and wait for the repeater to restart.
10. Relocate the repeater to a suitable location between your router and the Wi-Fi dead zone for optimal signal extension.

AP Mode Setup (Access Point)

1. Plug the repeater into a power outlet.
2. Connect the repeater to your router using an Ethernet cable.
3. Follow steps 3-6 from Repeater Mode Setup.
4. Select "AP Mode" and configure the new Wi-Fi network name (SSID) and password.
5. Save the settings and wait for the repeater to restart.

Oibriúcháin

Once configured, the PIX LINK 2800M WiFi Repeater will automatically extend your wireless network.

Táscaire Soilse

• Power faoi stiúir: Solid green indicates the device is powered on.
• WLAN stiúir: Blinking indicates active wireless data transmission.
• LAN stiúir: Solid green indicates an active Ethernet connection.
• Comhartha LED: Indicates the strength of the signal received from the main router (e.g., green for strong, yellow for medium, red for weak).

Cothabháil

• Coinnigh an gléas glan agus saor ó dheannach. Bain úsáid as éadach bog, tirim le haghaidh glanadh.
• Ná bac leis na poill aerála ar an bhfeiste.
• Periodically check for firmware updates on the manufacturer's websuíomh chun an fheidhmíocht agus an tslándáil is fearr a chinntiú.

Fabhtcheartú

Gan Rochtain Idirlín Tar éis Socraithe

• Ensure the repeater is within effective range of your main router.
• Verify that you entered the correct Wi-Fi password for your main network during setup.
• Try restarting both your main router and the repeater.
• Check the Signal LED on the repeater; if it's red, move the repeater closer to the main router.

Ní Féidir Rochtain Web Leathanach Bainistíochta

• Ensure your device is connected to the repeater's Wi-Fi network or via Ethernet.
• Verify the IP address or domain name entered in the browser.
• Bain triail as taisce do bhrabhsálaí a ghlanadh nó brabhsálaí difriúil a úsáid.
• Reset the repeater to factory defaults (refer to the Quick Installation Guide for specific instructions) and try setup again.

Sonraíochtaí

Barántas agus Tacaíocht

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official PIX LINK websuíomh.

For further assistance, contact PIX LINK customer service through their official channels.