1. Táirge Tharview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- Mótar Ard-acmhainn: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Dearadh eirgeanamaíochta: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. Treoracha Sábháilteachta
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
Sábháilteacht Ghinearálta
- Caith trealamh cosanta pearsanta (TCP) cuí i gcónaí, lena n-áirítear spéaclaí sábháilteachta, cosaint éisteachta, lámhainní agus masc deannaigh.
- Cinntigh go bhfuil an workpiece go daingean clamproimh an oibríocht.
- Keep hands clear of rotating parts and the cutting/grinding area.
- Ná hoibrigh an uirlis in atmaisféir phléascacha, mar shampla leachtanna inadhainte, gáis nó deannaigh.
- Coinnigh leanaí agus lucht féachana ar shiúl agus uirlis chumhachta á oibriú.
Sábháilteacht Leictreach
- A chinntiú go bhfuil an soláthar cumhachta voltage matches the rating on the tool's nameplate.
- Ná mí-úsáid an corda. Ná húsáid an corda riamh chun an uirlis chumhachta a iompar, a tharraingt nó a dhíphlugáil. Coinnigh corda ar shiúl ó theas, ola, imill ghéar, nó páirteanna gluaisteacha.
- Má tá uirlis chumhachta á oibriú i bhfógraamp áit nach féidir a sheachaint, bain úsáid as soláthar cosanta feiste srutha iarmharaigh (RCD).
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. Comhpháirteanna agus Gnéithe
Príomh-chomhpháirteanna:
- Príomhchorp: Houses the motor, electronics, and gearbox.
- Garda Cosanta: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- Cnaipe Glas Fearsaid: For easy disc changes.
- Athraigh Sleamhnán: Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- Feadáin Aeir: For motor cooling and dust expulsion.
4. Socrú
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- Brúigh agus coinnigh an cnaipe glasála fearsaid.
- Place the inner clamping flange ar an fhearsaid.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- Scriú ar an clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- Scaoil an cnaipe glas fearsaid.
5. Treoracha Oibriúcháin
Cumhachtú Ar / As
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
Rialú Luas Athraitheach
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- Coinnigh an meilteoir go daingean le do dhá lámh i gcónaí.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. Cothabháil
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
Glanadh
- Díphlugáil an uirlis i gcónaí roimh ghlanadh.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- Glan taobh amuigh an uirlis le fógraamp éadach. Ná húsáid ceimiceáin gharbh ná glantóirí scríobacha.
Scuaba Carbóin
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
Stóráil
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. Fabhtcheartú
| Fadhb | Cúis Féideartha | Réiteach |
|---|---|---|
| Ní thosaíonn an uirlis | Gan soláthar cumhachta Restart interlock activated (after power failure) Corda cumhachta damáiste | Seiceáil nasc cumhachta Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| Stopann an uirlis le linn oibríochta | Cosaint ró-ualaithe gníomhachtaithe Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| Creathadh iomarcach | Worn or damaged disc Diosca gléasta go míchuí Láimhseáil scaoilte | Athsholáthar diosca Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | Scuaba carbóin caite Dust buildup in vents | Have brushes inspected/replaced by service center Glan na bealaigh aeir go críochnúil |
8. Sonraíochtaí
| Saintréith | Luach |
|---|---|
| Uimhir Mhúnla | 447668 |
| Ionchur Cumhachta | 1700 W |
| Aschur Cumhachta | 1050 W |
| Imltage | 230 V |
| Minicíocht | 50/60 Hz |
| Trastomhas Diosca Uasta | 125 mm |
| Luas gan ualach | 2800-11500 rpm |
| Tool Holder (Angle Grinder) | M14 |
| Fad Cábla | 4 m |
| Toisí (L x W x H) | 340 x 77 x 105 mm |
| Meáchan | 2.6 kg |
| Dath | Dearg, Dubh, Airgead |
| Ábhar | Miotal |
9. Barántas agus Tacaíocht
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex websuíomh nó ar phacáistiú do tháirge.