1. Réamhrá
This manual provides detailed instructions for the installation, operation, and maintenance of your MokerLink 6 Port PoE Switch (Model 4 PoE + 2 FE). This unmanaged switch is designed to provide both data and power over Ethernet cables to compatible devices, simplifying network deployment. Please read this manual thoroughly before using the device to ensure proper and safe operation.
2. Táirge Tharview
2.1 Príomhghnéithe
- 6 Poirt: Includes 4 Power over Ethernet (PoE) ports and 2 Fast Ethernet (FE) Uplink ports, all supporting 10/100Mbps speed.
- High PoE Power: Maximum support of 78W total output power, with a built-in power supply. Each PoE port provides up to 30W, compliant with IEEE 802.3af/at standards. Note: Does not support passive 24V PoE.
- Unmanaged Plug & Play: Features Power Detection function to automatically identify and power PoE-compatible devices. Provides data connectivity for non-PoE devices. No configuration required.
- Feidhm a Shíneadh: When activated, PoE ports can extend data and power transmission up to 250 meters (820 ft) at 10Mbps, with port isolation for enhanced network safety.
- Dearadh Buan: Built with a fanless metal housing for quiet operation and effective heat dissipation. Includes LED indicator lights for status monitoring.
- Feidhmchlár Ilghnéitheach: Suitable for IP cameras, Wireless Access Points, IP Phones, and other network devices.
2.2 Ábhar an Phacáiste
- 1 x MokerLink 6 Port 10/100Mbps PoE+ Switch (4 PoE + 2 FE)
- 1 x Cábla Cumhachta AC
- 4 x Screws with nuts
- 2 x Hanger (for mounting)
- 1 x lámhleabhar úsáideora
2.3 Leagan Amach an Phainéil Tosaigh
The front panel of the switch features all network ports and status indicators.
Figure 1: Front Panel of the MokerLink 6 Port PoE Switch. It displays 4 PoE ports (1-4), 2 Uplink ports (5-6), a power indicator, and an Extend/Default mode switch.
- Poirt PoE (1-4): These four ports support Power over Ethernet (PoE+) and data transmission at 10/100Mbps. Connect PoE-compatible devices such as IP cameras or Wireless Access Points here.
- Uplink Ports (5-6): These two ports are Fast Ethernet (FE) uplink ports, supporting 10/100Mbps data transmission. Connect these to your router, NVR, or other network devices for data connectivity.
- Táscaire Cumhachta: Soilseann sé nuair a bhíonn an lasc ar siúl.
- Extend/Default Switch: Toggles between standard operation (Default) and extended range mode (Extend).
2.4 Leagan Amach an Phainéil Chúil
The rear panel contains the AC power input.
Figure 2: Rear Panel of the MokerLink 6 Port PoE Switch. It features the standard AC power input socket.
3. Socrú
3.1 Suiteáil Fhisiciúil
- Socrúchán: Place the switch on a stable, flat surface or mount it to a wall using the provided hangers and screws. Ensure adequate ventilation around the device.
- Ceangal Cumhachta: Connect the supplied AC power cable to the power input on the rear panel of the switch and then to a standard electrical outlet. The Power LED on the front panel should illuminate.
Figure 3: Wall mounting option for the PoE Switch.
3.2 Ceangal Líonra
- Connect PoE Devices: Use standard Ethernet cables to connect your PoE-compatible devices (e.g., IP cameras, Wireless APs) to ports 1-4. The switch will automatically detect and power these devices.
- Connect Non-PoE Devices/Uplink: Connect your router, NVR, or other non-PoE network devices to the Uplink ports (5-6) using standard Ethernet cables. These ports provide data connectivity only.
Figure 4: Connecting various devices to the PoE switch. IP cameras, Wireless APs, and IP phones connect to PoE ports for data and power. Routers, computers, and NVRs connect to uplink ports for data only.
4. Treoracha Oibriúcháin
The MokerLink 6 Port PoE Switch is a plug-and-play device, requiring no software configuration. Once powered on and connected, it will automatically begin functioning.
4.1 Táscairí LED
Monitor the status of the switch and connected devices using the front panel LEDs:
- Cumhacht stiúir:
- ar: Tá an lasc faoi thiomáint.
- As: Tá an lasc thiomáint as.
- Soilse Nasc/Gníomh (in aghaidh an chalafoirt):
- ar: A device is connected and a link is established.
- Blinking: Tá gníomhaíocht sonraí ar siúl ar an gcalafort.
- As: No device is connected or no link is established.
- Soilse PoE (in aghaidh an chalafoirt PoE):
- ar: Power is being supplied to the connected PoE device.
- As: No power is being supplied (either not a PoE device or an issue exists).
5. Extend Mode and VLAN Function
5.1 Mód a Shíneadh
The switch features an 'Extend' mode, controlled by a physical switch on the front panel. This mode is useful for deploying PoE devices over longer distances.
Figure 5: Comparison of Default and Extend modes for PoE range and speed.
- Mód Réamhshocraithe: Standard operation, supporting up to 100 meters (328 ft) at 10/100Mbps.
- Mód Leathnaigh: When the switch is set to 'Extend', the PoE ports (1-4) can transmit data and power up to 250 meters (820 ft). In this mode, the data speed for these ports is reduced to 10Mbps. This is ideal for long-distance surveillance camera deployments.
5.2 Port Isolation (VLAN)
When the 'Extend' mode is active, the PoE ports (1-4) are isolated from each other. This means that devices connected to these ports cannot directly communicate with each other, enhancing network security and preventing broadcast storms. All isolated ports can still communicate with the Uplink ports (5-6).
Figure 6: Port Isolation (VLAN) in Extend Mode. Devices on ports 1-4 are isolated from each other but can communicate with uplink ports.
6. Cothabháil
6.1 Glanadh
- Ensure the switch is powered off and unplugged before cleaning.
- Bain úsáid as éadach bog tirim chun an taobh amuigh den fheiste a ghlanadh.
- Ná húsáid glantóirí leachtacha ná aerasóil, mar d’fhéadfadh siad damáiste a dhéanamh don fheiste.
6.2 Cúrsaí Timpeallachta
- Operate the switch within the specified temperature range of -10°C to 55°C (14°F to 131°F).
- Avoid placing the switch in direct sunlight or near heat sources.
- Ensure proper airflow around the device, especially since it is fanless and relies on passive cooling.
- Keep the switch away from moisture and excessive dust.
Figure 7: Fanless design for silent operation.
7. Fabhtcheartú
If you encounter issues with your MokerLink PoE Switch, refer to the following common problems and solutions:
| Fadhb | Cúis Féideartha | Réiteach |
|---|---|---|
| Gan aon táscaire LED cumhachta | Power cable not connected or faulty power source. | Ensure the AC power cable is securely connected to the switch and a working power outlet. Test the outlet with another device. |
| Gan aon LED Nasc/Gníomh don fheiste nasctha | Faulty Ethernet cable, incorrect port connection, or device issue. | Verify the Ethernet cable is securely connected at both ends. Try a different cable. Ensure the device is powered on and functioning correctly. |
| PoE device not receiving power (PoE LED off) | Device is not PoE-compatible, cable issue, or power budget exceeded. | Confirm the device is IEEE 802.3af/at compliant. Check the Ethernet cable for damage. Ensure the total power consumption of all PoE devices does not exceed 78W. |
| Slow network speed in Extend mode | Táthar ag súil leis an iompar seo. | In Extend mode, the speed is intentionally reduced to 10Mbps to achieve longer transmission distances. This is not a fault. |
| Devices on PoE ports cannot communicate with each other | Extend mode is active, enabling port isolation. | This is the intended function of port isolation in Extend mode. If direct communication between PoE devices is required, switch the device to Default mode. |
8. Sonraíochtaí
The following table outlines the technical specifications for the MokerLink 6 Port PoE Switch (4 PoE + 2 FE):
| Gné | Sonraíocht |
|---|---|
| Uimhir Mhúnla | 4 PoE + 2 FE |
| Líon na gCalafort | 6 (4 PoE+, 2 Fast Ethernet Uplink) |
| Ráta Aistrithe Sonraí | 10/100 Mbps |
| Caighdeán PoE | IEEE 802.3af / ag |
| Maximum PoE Power | 78 Vata (san iomlán) |
| Max Power Per PoE Port | 30 Watts |
| Cineál Comhéadain | RJ45 |
| Ábhar Cás | Miotal |
| Dearadh Fanless | Tá |
| Extend Mode Range | Up to 250 meters (820 ft) at 10Mbps |
| Teocht Oibriúcháin | -10°C go 55°C (14°F go 131°F) |
| Toisí Táirge | 7.87 x 4.65 x 1.73 orlach |
| Meáchan Mír | 1.89 punt |
| Ionchur Voltage | AC 100-240V (Built-in Power Supply) |
9. Faisnéis Sábháilteachta
- Ná hoscail an gléas casing. Níl aon chodanna istigh ann ar féidir leis an úsáideoir iad a sheirbhísiú.
- Coinnigh an gléas ar shiúl ó uisce, dóiteáin, taise nó timpeallachtaí te.
- Ná húsáid ach an t-oiriúnóir cumhachta a chuirtear ar fáil leis an bhfeiste.
- A chinntiú go bhfuil an talamh ceart do shábháilteacht leictreachais.
- Seachain rudaí troma a chur ar an lasc.
- Dícheangail an cumhacht le linn stoirmeacha leictreacha nó nuair nach bhfuil sé in úsáid ar feadh tréimhsí fada.
Figure 8: MokerLink PoE Switch with key features.
10. Barántas agus Tacaíocht
10.1 Faisnéis Bharántas
This MokerLink product is typically covered by a standard return policy, which allows for returns or replacements within 30 days of purchase. Please refer to your purchase platform's specific return policy for detailed terms and conditions.
10.2 Tacaíocht Theicniúil
For technical assistance or further inquiries regarding your MokerLink 6 Port PoE Switch, please contact MokerLink customer support through their official channels or the retailer from whom the product was purchased. Contact information can usually be found on the MokerLink official websuíomh nó laistigh de phacáistiú do tháirge.