Schellenberg 70988 Basic Window Mosquito Screen 120 x 140 cm Instruction Manual

Réamhrá

This manual provides detailed instructions for the assembly, installation, and maintenance of your Schellenberg Basic Window Mosquito Screen, model 70988. This kit is designed to protect your home from insects while allowing fresh air circulation. It features a high-quality fiberglass fabric and a robust aluminum frame, suitable for various window types, including those with roller shutters.

Treoracha Sábháilteachta

• Always read and understand all instructions before beginning assembly or installation.
• Use appropriate safety gear, such as gloves, when handling tools and materials.
• Keep small components out of reach of children to prevent choking hazards.
• Cinntigh go bhfuil an limistéar oibre glan agus soilsithe go maith.
• Ná déan aon mhodhnú ar an táirge nach bhfuil cur síos air sa lámhleabhar seo.

Ábhar an Phacáiste

Deimhnigh le do thoil go bhfuil na comhpháirteanna uile atá liostaithe thíos i láthair i do phacáiste:

• 4 x Aluminum profiles for the clampfráma ing
• 1 x Fiberglass mosquito net fabric
• 4 x Corner connectors
• 4 x Corner connection caps
• 4 x Stainless steel suspension springs
• 2 x Piping handles
• 4 x Piping beads
• 1 x Brush seal
• 1 x treoracha cóimeála

Socrú agus Tionól

Follow these steps to assemble and install your window mosquito screen:

1. Prepare the Profiles: Ceangail an pro alúmanaimfiles using the corner connectors to form the frame. Ensure they are securely fitted.
2. Install the Mesh: Lay the fiberglass mosquito net fabric over the assembled frame. Using the piping beads and a suitable tool (not included, typically a spline roller), press the fabric into the groove of the aluminum profiles. Trim any excess fabric.
3. Attach Handles and Springs: Secure the two piping handles to the frame. Insert the stainless steel suspension springs into the designated slots on the frame.
4. Apply Brush Seal: Integrate the brush seal into the frame. This seal helps to close any gaps between the mosquito screen and your window frame, providing enhanced protection against insects.
5. Installation on Window: The assembled mosquito screen is designed to be hung onto the window frame using the integrated suspension springs. No drilling into your window frame is required. The slim profile (9 mm total installation depth) allows for installation even behind existing roller shutters.

Treoracha Oibriúcháin

Once installed, the mosquito screen provides continuous insect protection. To open or close your window, simply unhook the screen from the window frame using the handles and set it aside. Re-attach it when the window is in the desired position. For seasonal use, the screen can be easily removed and stored.

Cothabháil

• Cleaning the Mesh: The fiberglass mesh can be cleaned with a soft brush or a damp cloth and mild soapy water. Rinse thoroughly with clean water and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
• Glanadh an Fhráma: Glan an fráma alúmanaim le fógraamp éadach.
• Stóráil: For prolonged periods of non-use (e.g., winter), remove the screen from the window and store it in a dry, protected area to extend its lifespan.

Fabhtcheartú

Sonraíochtaí

Barántas agus Tacaíocht

For warranty information, product support, or to inquire about replacement parts, please refer to the official Schellenberg websuíomh gréasáin nó déan teagmháil dhíreach lena seirbhís do chustaiméirí. Coinnigh do chruthúnas ceannaigh le haghaidh aon éilimh bharántais.

Eolas Teagmhála:

• Monaróir: Schellenberg
• Websuíomh: www.schellenberg.de (Please check for local country-specific websuíomhanna)