Lámhleabhar Úsáideora Cainteoir Bluetooth Gan Sreang Inaistrithe HyperGear Wave 14704

Réamhrá

The HyperGear Wave Portable Wireless Bluetooth Speaker (Model 14704) is designed to deliver high-definition stereo sound in various environments. Its IPX4 waterproof rating makes it suitable for use near water, while the built-in microphone allows for hands-free calls. This manual provides essential information for the proper setup, operation, and maintenance of your speaker.

Image: HyperGear Wave speaker, showcasina dhearadh uiscedhíonach le splancscáileáin uisce.

Ábhar an Phacáiste

Deimhnigh go bhfuil na míreanna uile i láthair sa phacáiste:

• HyperGear Wave Speaker
• 3.5mm Stereo Auxiliary Cable
• Cábla Muirearú Micrimhilseogra USB
• Lámhleabhar Úsáideora (an doiciméad seo)

Image: The HyperGear Wave speaker alongside its included 3.5mm auxiliary cable and Micro USB charging cable.

Socrú

1. Muirearú ar an gCainteoir

Before initial use, fully charge the speaker. Connect the Micro USB Charging Cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging indicator light will illuminate during charging and turn off or change color when fully charged.

2. Cumhacht Ar / As

Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds to turn the speaker on or off. A sound prompt or LED indicator will confirm the status change.

Treoracha Oibriúcháin

1. Péireáil Bluetooth

1. Ensure the speaker is powered on and within 33 feet (10 meters) of your Bluetooth-enabled device.
2. The speaker will automatically enter pairing mode, indicated by a flashing LED light (refer to your speaker's specific LED behavior).
3. On your device, navigate to the Bluetooth settings and search for available devices.
4. Select "HyperGear Wave" (or similar name) from the list.
5. Nuair a bheidh sé péireáilte, cuirfidh an cainteoir fuaim dheimhnithe amach, agus beidh an solas LED soladach.

Déanfaidh an cainteoir iarracht go huathoibríoch athcheangal leis an bhfeiste péireáilte dheireanach nuair a chuirtear ar siúl é.

Image: The HyperGear Wave speaker positioned on sand, demonstrating its wireless capability for outdoor use.

2. Rialuithe Bunúsacha

• Seinn/Sos: Brúigh an cnaipe Seinn/Sos uair amháin.
• Imleabhar Suas: Brúigh an cnaipe '+'.
• Imleabhar an Dúin: Brúigh an cnaipe '-'.
• An Chéad Amhrán Eile: Brúigh agus coinnigh an cnaipe '+'.
• Rian Roimhe Seo: Brúigh agus coinnigh an cnaipe '-'.
• Freagra/Deireadh Glao: Brúigh an cnaipe Seinn/Sos uair amháin le linn glao isteach.
• Diúltaigh Glao: Brúigh agus coinnigh an cnaipe Seinn/Sos le linn glao isteach.

3. Audio Input Modes

The HyperGear Wave speaker supports multiple audio input options:

• Mód Bluetooth: Nasc gan sreang réamhshocraithe.
• Auxiliary (AUX) Mode: Connect an audio device using the included 3.5mm Stereo Auxiliary Cable. The speaker will automatically switch to AUX mode when the cable is inserted.
• Mód Cárta Micrimhilseogra SD: Insert a Micro SD card (not included) with audio files into the designated slot. The speaker will automatically detect and play music from the card.

Íomhá: Dlúthghraf view of the speaker highlighting its compatibility with Bluetooth, Auxiliary input, and Micro SD cards.

Cothabháil

• Glanadh: Bain úsáid as bog, damp cloth to clean the speaker's exterior. Avoid harsh chemicals or abrasive cleaners.
• Nochtadh Uisce: While IPX4 waterproof, avoid submerging the speaker. Ensure all port covers are securely closed before exposure to water.
• Stóráil: Stóráil an cainteoir in áit fhionnuar, thirim amach ó theocht mhór agus ó sholas díreach na gréine.
• Cúram Battery: Chun saolré na ceallraí a fhadú, seachain an cainteoir a dhíluchtú go hiomlán go minic. Muirearaigh é go rialta, fiú mura bhfuil sé in úsáid ar feadh tréimhsí fada.

Image: The HyperGear Wave speaker attached to a kayak, illustrating its suitability for splash-prone environments.

Fabhtcheartú

• Speaker will not turn on: Cinntigh go bhfuil an ceallraí luchtaithe. Ceangail an cábla luchtaithe agus déan iarracht arís.
• Ní féidir péireáil le gléas Bluetooth:
  • Cinntigh go bhfuil an cainteoir i mód péireála (LED ag splancadh).
  • Cinntigh go bhfuil Bluetooth cumasaithe ar do ghléas.
  • Bog an cainteoir níos gaire do do ghléas (laistigh de 33 troigh).
  • Múch agus cuir an cainteoir agus Bluetooth do ghléis ar siúl.
  • Forget the speaker from your device's Bluetooth list and attempt to re-pair.
• Gan fuaim nó toirt íseal:
  • Coigeartaigh an toirt ar an gcainteoir agus ar do ghléas nasctha araon.
  • Ensure the speaker is properly paired or the AUX cable/Micro SD card is correctly inserted.
  • Seiceáil an bhfuil an fhoinse fuaime ag seinm.
• Droch-chaighdeán fuaime:
  • Move the speaker closer to your Bluetooth device to avoid interference.
  • Cinntigh nach bhfuil aon bhacainní idir an cainteoir agus do ghléas.
  • If using AUX, check the cable for damage and ensure it's fully inserted.

Sonraíochtaí

Barántas agus Tacaíocht

Faisnéis Bharántas

This HyperGear product comes with a Limited Warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or visit the official HyperGear websuíomh.

Tacaíocht do Chustaiméirí

If you encounter any issues or have questions not covered in this manual, please contact HyperGear customer support. Contact information can typically be found on the product packaging or the official HyperGear websuíomh: www.hypergear.com.