Lámhleabhar Úsáideora Glantóra Folúis Róbat eufy BoostIQ RoboVac 11S (Caol)

Réamhrá

This manual provides essential instructions for the safe operation, maintenance, and troubleshooting of your eufy BoostIQ RoboVac 11S (Slim) robot vacuum cleaner. Please read this manual thoroughly before using your RoboVac and retain it for future reference.

Treoracha Tábhachtacha Sábháilteachta

Always follow basic precautions, including:

• Léigh na treoracha go léir roimh úsáid a bhaint as an bhfearas.
• Do not operate the RoboVac in areas with open flames or flammable materials.
• Coinnigh gruaig, éadaí scaoilte, méara, agus gach cuid den chorp ar shiúl ó oscailtí agus páirteanna gluaisteacha.
• Bain úsáid as ach amháin mar a thuairiscítear sa lámhleabhar seo.
• Ná húsáid gan bosca bruscair agus/nó scagairí.
• Ná lig do leanaí súgradh leis an bhfearas.
• Only use the power adapter supplied by the manufacturer.
• Do not use the appliance to pick up large debris, liquids, or sharp objects.

Ábhar an Phacáiste

• 1 x eufy BoostIQ RoboVac 11S (Slim)
• 1 x Remote control (AAA batteries included)
• 1 x Charging Base & Power Adapter
• 1 x Uirlis Glantacháin
• 2 x Side Brushes (additional pair)
• 1 x Filter Set (additional set)
• 1 x lámhleabhar úsáideora
• 1 x Treoir Mhearthosaithe
• 1 x Faisnéis Bharántas

Socrú

1. Prepare the RoboVac

• Remove all protective films and stickers from the RoboVac and charging base.
• Attach the side brushes by pressing them onto the square posts until they click.

2. Install the Charging Base

Place the charging base on a hard, level surface against a wall. Ensure there is at least 3 feet (1 meter) of clear space to either side and 6 feet (2 meters) in front of the charging base. Connect the power adapter to the charging base and a wall outlet. The indicator light on the charging base will illuminate.

Image: RoboVac automatically returning to its charging base.

3. Muirear Tosaigh

Place the RoboVac onto the charging base, ensuring the charging pins align. For first-time use, charge the RoboVac for at least 12 hours. The indicator light on the RoboVac will breathe orange while charging and turn solid blue when fully charged.

Operating Your RoboVac

1. Cumhacht Ar / As

Press and hold the power button on the RoboVac for 3 seconds to turn it on or off. The indicator light will turn blue when on.

2. Modhanna Glanadh

The RoboVac offers several cleaning modes, selectable via the remote control:

• Glanadh Uathoibríoch: The RoboVac cleans automatically using various cleaning patterns. This is the default mode.
• Glanadh Spota: For concentrated cleaning of a specific area. The RoboVac will clean in a spiral pattern for approximately 2 minutes.
• Glanadh Imeall: Glanann an RoboVac feadh ballaí agus imill troscáin.
• Glanadh Seomra Aonair: The RoboVac cleans a single room and then returns to its charging base.

Image: Remote control for selecting cleaning modes and scheduling.

3. Teicneolaíocht BoostIQ

The RoboVac automatically increases suction power when extra vacuuming strength is needed, such as when transitioning from hard floors to carpets. This feature activates in approximately 1.5 seconds.

Image: RoboVac activating BoostIQ for increased suction on carpet.

4. Sceidealú

Use the remote control to set a cleaning schedule for your RoboVac. Refer to the remote control section in the full manual for detailed instructions on setting schedules.

Cothabháil

Cinntíonn cothabháil rialta go bhfeidhmíonn do RoboVac go barrmhaith.

1. An Bosca Deannaigh a Fholmhú

Empty the dust bin after each use. Press the dust bin release button and pull out the bin. Open the dust bin cover and discard debris.

Image: The dust bin removed from the RoboVac, showing collected debris.

2. Glanadh na Scagairí

Remove the filters from the dust bin. Tap them to remove dust and rinse them under running water. Allow filters to air dry completely before reinstalling. Replace filters every 3-6 months, or as needed.

Image: Diagram illustrating the multi-layer filter system of the RoboVac.

3. Cleaning the Rolling Brush and Side Brushes

Remove the rolling brush cover and lift out the rolling brush. Use the cleaning tool to remove hair and debris. Clean the side brushes by pulling them off and removing any tangled hair or debris. Replace worn side brushes.

4. Cleaning the Sensors and Charging Contacts

Wipe the drop sensors, charging contacts, and swivel wheel with a dry cloth to maintain proper function.

Fabhtcheartú

Sonraíochtaí

Barántas agus Tacaíocht

Your eufy BoostIQ RoboVac 11S (Slim) comes with a Barántas 12 mhí. For technical support, warranty claims, or additional information, please refer to the warranty information card included in your package or visit the official eufy support websuíomh.