StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

Múnla: RKCONS 1901 | Branda: StarTech.com

1. Réamhrá

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. Cad atá sa Bhosca

  • Consól KVM
  • 6 ft [1.8 m] KVM cable
  • M5 cnónna cage
  • Scriúnna M5

3. Socrú agus Suiteáil

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 Gléasta Raca

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 Cábla a Cheangal

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
cúil view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

Fíor 2: Cúil view of the KVM Console with connection ports.

3.3 Tagairt Físeáin Suiteála

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. Treoracha Oibriúcháin

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 Ag Úsáid an Mhéarchláir agus an Teagmhéadáin

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 Nascleanúint Roghchláir OSD

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. Cothabháil

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • Glanadh: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • Aeráil: Ensure proper airflow around the console. Do not block ventilation openings.
  • Bainistíocht Cábla: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • Coinníollacha Comhshaoil: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. Fabhtcheartú

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • Gan Taispeáin: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • Méarchlár/Luch Gan Fhreagracht: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. Sonraíochtaí

GnéSonraíocht
Uimhir MhúnlaRKCONS 1901
BrandaStarTech.com
Airde Raca1U
Méid Taispeána19 Orlach
Cineál TaispeánaActive Matrix TFT LCD
Rún Max1280x1024
Méarchlár99-key full keyboard with numeric keypad
Gléas Pointeálatouchpad
Comhéadan FíseVGA
Tacaíocht USB
Teocht Oibriúcháin0 go 40 Céim Celsius
MTBF50,000 uair
Toisí Táirge (LxWxH)21 x 19 x 1.7 orlach
Meáchan Mír26.8 punt

8. Barántas agus Tacaíocht

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com websuíomh gréasáin nó déan teagmháil dhíreach lena seirbhís do chustaiméirí. Coinnigh d’admháil ceannaigh le haghaidh éilimh bharántais.

© 2026 StarTech.com. Gach ceart ar cosaint.