Secukey SK4-W Standalone Access Control System

1. Réamhrá

This user manual provides comprehensive instructions for the installation, operation, and maintenance of the Secukey SK4-W Standalone Access Control System. Please read this manual carefully before installation and use to ensure proper functionality and safety.

The Secukey SK4-W is a robust, IP66-rated access control device designed for outdoor use, featuring RFID card and PIN code access. It is an ideal solution for securing doors, gates, and other entry points.

2. Táirge Tharview

2.1 Príomhghnéithe

• IP66 Waterproof and Anti-Vandal Design: Suitable for harsh outdoor environments.
• Módanna Rochtana Il: Supports RFID card only, PIN code only, or Card + PIN for enhanced security.
• Cumas Úsáideora Ard: Manages up to 1000 users.
• Integrated Relay: Built-in NO, NC, Com relay for direct door lock control.
• Adjustable Output Times: Programmable lock output time (1-99 seconds) and alarm output time (1-3 minutes).
• Wiegand 26-bit Interface: Supports external Wiegand readers, exit buttons, and alarms.
• Mód Glasála: Allows the door or gate to remain open.
• Leathan Voltage Raon: Operates on 12~28V AC/DC.
• Méarchlár backlit: Cinntíonn sé infheictheacht i ndálaí ísle solais.
• Tógáil Buan: Zinc alloy casing with powder coating.

2.2 Comhpháirteanna san áireamh

• 1 x Secukey SK4-W Standalone Access Control Device (RFID/PIN)
• 1 x Master Add Card
• 1 x Master Delete Card
• 1 x lámhleabhar úsáideora

2.3 Táirge Views

Fíor 1: Tosaigh view of the SK4-W unit, highlighting the keypad and Secukey branding.

Fíor 2: Uilleach view of the SK4-W, providing a perspective of its slim profile.

Fíor 3: Taobh view of the SK4-W unit.

Fíor 4: Taobh eile view of the SK4-W unit.

Fíor 5: Ar ais view of the SK4-W unit, displaying the integrated wiring for installation.

3. Socrú agus Suiteáil

3.1 An Gléas a chur suas

The SK4-W is designed for surface mounting. Choose a secure location near the door or gate, ensuring it is within reach for users and protected from direct impact. Use appropriate screws and wall plugs for the mounting surface.

3.2 Léaráid Sreangaithe

The device requires a 12~28V AC/DC power supply (not included). Connect the wires according to the diagram provided in the full manual. Ensure all connections are secure and insulated to prevent short circuits.

• Ionchur Cumhachta: Connect to 12~28V AC/DC power source.
• Lock Output (NO/NC/COM): Connect to your electric lock.
• Aschur Aláraim: Connect to an external alarm system (if applicable).
• Wiegand In/Out: For connecting external Wiegand readers or other Wiegand devices.
• Cnaipe Scoir: Connect a push-to-exit button for convenient egress.

For detailed wiring schematics, please refer to the comprehensive wiring diagram included in the product packaging.

4. Treoracha Oibriúcháin

4.1 Initial Setup and Master Cards

Upon first power-up, the device will be in factory default mode. Use the included Master Add Card and Master Delete Card to manage user access.

• Úsáideoirí a Chur Leis: Present the Master Add Card, then present the new user's RFID card or enter their PIN.
• Úsáideoirí á scriosadh: Present the Master Delete Card, then present the user's RFID card or enter their PIN to be deleted.

4.2 Access Modes

The SK4-W supports three primary access modes:

1. Card Only Mode: Users gain access by presenting a valid RFID card.
2. PIN Only Mode: Users gain access by entering a valid 4-6 digit PIN code.
3. Card + PIN Mode: Users must present a valid RFID card and then enter their corresponding PIN code for access. This mode offers the highest security.

Refer to the full programming guide for instructions on how to switch between access modes and manage user PINs.

4.3 Visitor PINs

The SK4-W supports up to 10 visitor PINs, which can be set to be valid for 1 to 10 uses. This feature is useful for temporary access for guests or service personnel.

Figure 6: The SK4-W supports visitor PINs and is IP66 waterproof, suitable for outdoor installation.

4.4 Latch Mode

The latch mode allows the door or gate to remain unlocked for an extended period, which can be useful during peak hours or for maintenance. Consult the programming manual for activation and deactivation procedures.

5. Cothabháil

The Secukey SK4-W is designed for minimal maintenance due to its robust construction and IP66 rating. However, regular checks can prolong its lifespan and ensure optimal performance.

• Glanadh: Wipe the keypad and casing le bog, damp éadach. Seachain glantóirí scríobacha nó tuaslagóirí.
• Seiceáil Ceangal: Periodically inspect wiring connections for any signs of wear, corrosion, or loosening.
• Nuashonruithe Firmware: Seiceáil an monaróir websuíomh gréasáin le haghaidh aon nuashonruithe firmware atá ar fáil.

Figure 7: The SK4-W is designed to withstand extreme operating temperatures, from -40°C to 60°C.

6. Fabhtcheartú

If the problem persists, please contact Secukey technical support for assistance.

Figure 8: Wiegand 26-bit input and output signal timing diagram.

7. Sonraíochtaí

8. Barántas agus Tacaíocht

Secukey products are manufactured to high quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official Secukey websuíomh.

Eolas Teagmhála:

• Monaróir: Secukey
• Websuíomh: www.secukey.com (exampan nasc, d'fhéadfadh an nasc iarbhír a bheith éagsúil)
• Seirbhís do Chustaiméirí: Féach ar phacáistiú an táirge nó website for regional support contacts.

Coinnigh do chruthúnas ceannaigh le haghaidh éilimh bharánta.