Philips myLiving PONGEE LED Spot Light (Model 5058131PN) User Manual

1. Réamhrá

This manual provides essential information for the safe and effective installation, operation, and maintenance of your Philips myLiving PONGEE LED Spot Light, Model 5058131PN. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: Philips myLiving PONGEE LED Spot Light

The Philips myLiving PONGEE spot light is designed for indoor use in functional spaces such as bedrooms or living rooms. Its swivel head allows for adjustable light direction, providing illumination precisely where needed.

2. Faisnéis Sábháilteachta

Lean na réamhchúraimí sábháilteachta seo a leanas i gcónaí chun díobháil nó damáiste a chosc:

• Sábháilteacht Leictreach: Installation must be performed by a qualified electrician in accordance with local wiring regulations. Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or bulb replacement.
• Úsáid Laistigh Amháin: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Do not install in bathrooms or other areas where it may be exposed to moisture.
• Cineál bolgán: Use only GU10 LED bulbs as specified. Do not exceed the maximum wattage léirithe ar an daingneán.
• Láimhseáil: Do not touch the bulb immediately after use as it may be hot. Allow it to cool before handling.
• Glanadh: Clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Ábhar Pacáiste

Deimhnigh go bhfuil na comhpháirteanna uile i láthair sula dtosaíonn tú ar an suiteáil:

• Philips myLiving PONGEE LED Spot Light fixture (1 unit)
• Crua-earraí gléasta (scriúnna, plocóidí balla)
• Lámhleabhar teagasc

Nóta: A GU10 LED bulb is nach bhfuil san áireamh agus ní mór iad a cheannach ar leithligh.

Fíor 2: Pacáistiú Táirge

4. Socrú agus Suiteáil

This spot light is designed for surface mounting on ceilings or walls. Refer to the dimensions diagram for planning your installation.

Figure 3: Product Dimensions (all measurements in mm)

1. Ullmhaigh an Limistéar Suiteála: Ensure the mounting surface is clean, dry, and structurally sound. Mark the desired mounting points based on the fixture's base.
2. Cumhacht a Dhícheangal: Before starting any electrical work, turn off the power supply to the circuit at the main fuse box or circuit breaker.
3. Mount the Bonn: Secure the fixture's mounting base to the ceiling or wall using the provided screws and wall plugs. Ensure it is firmly attached.
4. Sreangaigh an Daingneán: Connect the electrical wires from the ceiling/wall to the fixture's terminals. Follow the standard wiring color codes (e.g., Live to Live, Neutral to Neutral, Earth to Earth). Ensure all connections are secure.
5. Suiteáil an bolgán: Insert a GU10 LED bulb (not included) into the socket by aligning the pins and twisting clockwise until secure.
6. Attach the Fixture Body: Secure the main body of the spot light to the mounted base.
7. Athchóirigh Cumhacht: Once installation is complete and all connections are checked, restore power at the main fuse box or circuit breaker.

5. Treoracha Oibriúcháin

The Philips myLiving PONGEE LED Spot Light is operated via a standard wall switch connected to its electrical circuit.

• Ag Casadh air/Múchta: Flip the wall switch to the 'ON' position to illuminate the spot light. Flip it to the 'OFF' position to turn it off.
• Treo Solais a Choigeartú: The spot light features a swivel head. Gently adjust the light head to direct the beam to your desired area. Avoid excessive force when adjusting.

6. Cothabháil

• Glanadh: Ensure the power is off and the fixture is cool before cleaning. Wipe the exterior with a soft, dry, lint-free cloth. Do not use liquid cleaners, aerosols, or abrasive materials.
• Athsholáthar Bleibíní:
  1. Múch an soláthar cumhachta ag an scoradán ciorcaid.
  2. Allow the bulb to cool completely.
  3. Gently twist the old GU10 bulb counter-clockwise to remove it from the socket.
  4. Insert a new GU10 LED bulb by aligning the pins and twisting clockwise until secure.
  5. Athchóirigh an chumhacht.

7. Fabhtcheartú

8. Sonraíochtaí

• Branda: Soilsiú Philips
• Uimhir Mhúnla: 5058131PN
• Toisí Táirge (L x W x H): 10 x 13.8 x 8.2 cm
• Meáchan Mír: 345 gram
• Ábhar: Miotal
• Dath: Bán
• Stíl: Nua-aimseartha
• Cineál Foinse Solais: stiúir
• Cineál Soicéad Bolgáin: GU10
• Líon na Bleibíní: 1 (bulb not included)
• Ionchur Voltage: 220-240 Volta
• Foinse Cumhachta: Electrical cable (wired)
• Cineál Suiteála: Surface Mount (Ceiling/Wall)
• Rátáil IP: IP20 (Úsáid laistigh amháin)
• Gnéithe Speisialta: Energy-efficient, Swivel head
• Úsáidí Sonracha: Home, Bedroom, Living Room

9. Barántas agus Tacaíocht

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips Lighting websuíomh. Féadfaidh tú teagmháil a dhéanamh le do mhiondíoltóir freisin le haghaidh cúnaimh.

Coinnigh do chruthúnas ceannaigh le haghaidh aon éilimh bharántais.