COMPUTHERM Q7RF Programmable Wireless Room Thermostat User Manual

1. Réamhrá

The COMPUTHERM Q7RF wireless room thermostat is designed for precise control of heating and air conditioning systems. This programmable device allows you to set individual temperature schedules for each day of the week, optimizing comfort and energy efficiency in your home or office. Its wireless design offers flexible placement of the thermostat unit, while the receiver unit connects directly to your boiler or air conditioning system, compatible with both 24V and 230V control circuits.

2. Ábhar Pacáiste

Deimhnigh go bhfuil na comhpháirteanna uile i láthair i do phacáiste:

• 4 x COMPUTHERM Q7RF Room Thermostat (Transmitter Unit)
• 4 x COMPUTHERM Q7RF Receiver Unit
• Lámhleabhar Úsáideora (an doiciméad seo)
• Scriúnna gléasta agus plocóidí balla

3. Táirge Tharview

The COMPUTHERM Q7RF system consists of two main components: the thermostat unit (transmitter) and the receiver unit. The thermostat unit measures the room temperature and allows you to set desired temperatures and programs. The receiver unit connects to your heating or cooling system and switches it on or off based on signals from the thermostat unit.

Fíor 1: Os a chionnview of the COMPUTHERM Q7RF 4-piece set, showing multiple thermostat and receiver units.

Figure 2: A single COMPUTHERM Q7RF thermostat unit communicating wirelessly with its receiver unit.

3.1 Thermostat Unit (Transmitter)

• Taispeáint LCD: Shows current temperature, set temperature, time, day, and program status.
• Cnaipí Rialaithe: For setting temperature, time, and programming schedules.
• Roinn Battery: Le haghaidh soláthar cumhachta.

3.2 Aonad Glacadóra

• Teirminéil Sreangaithe: For connection to the heating/cooling system.
• Táscairí Stádas: LEDs to show power and relay status.
• Manual Override Buttons: For temporary manual control.

4. Sonraíochtaí

5. Socrú agus Suiteáil

5.1 Thermostat Unit Placement and Battery Installation

1. Roghnaigh Suíomh: Place the thermostat unit in a central area of the room where it can accurately measure the ambient temperature, away from direct sunlight, drafts, or heat sources.
2. Suiteáil Cadhnraí: Open the battery compartment on the back of the thermostat unit. Insert the required batteries (typically AA or AAA, refer to the unit's markings) ensuring correct polarity. Close the compartment.
3. Cumhacht ar: The display should light up, indicating the unit is powered.

5.2 Receiver Unit Wiring

WARNING: Electrical installation should only be performed by a qualified electrician. Disconnect power to the heating/cooling system before proceeding.

1. Mount the Receiver: Secure the receiver unit near your boiler or air conditioning system using the provided screws and wall plugs.
2. Access Wiring Terminals: Open the cover of the receiver unit to expose the wiring terminals.
3. Ceangail leis an gCóras: Connect the receiver unit to the two-wire room thermostat connection point of your boiler or AC system. Ensure connections are secure and follow the wiring diagram provided with your heating/cooling system and the receiver unit. The COMPUTHERM Q7RF is compatible with both 24V and 230V control circuits.
4. Athchóirigh Cumhacht: Once wiring is complete and verified, close the receiver unit cover and restore power to your heating/cooling system.

5.3 Pairing the Units (If not pre-paired)

Refer to the specific instructions provided with your Q7RF set for pairing procedures. Typically, this involves pressing a pairing button on the receiver unit and then initiating a pairing sequence on the thermostat unit within a short timeframe. A successful pairing will usually be indicated by an LED on the receiver or a message on the thermostat display.

6. Treoracha Oibriúcháin

6.1 Tuiscint a fháil ar an Taispeántas LCD

The LCD display provides all necessary information about the thermostat's current status and settings.

Fíor 3: Mionsonraithe view of the COMPUTHERM Q7RF LCD display, illustrating various indicators such as program number, manual modification symbol, weekdays, time, set temperature, actual room temperature, low battery symbol, boiler ON state, and timed control symbol.

• Laethanta na seachtaine: Léiríonn sé an lá reatha den tseachtain.
• Exact Time / Time Left: Displays the current time or time remaining for a manual modification.
• Uimhir an Chláir: Shows the active program segment.
• Teocht Socraigh: The desired temperature set by the user.
• Actual Room Temperature: The current temperature measured by the thermostat.
• Symbol for Manual Modification: Indicates that the thermostat is currently operating under a temporary manual override.
• Temp. Modified until next manual intervention: Shows the duration of a temporary temperature change.
• Symbol for Low Battery Voltage: Appears when batteries need replacement.
• Symbol for Boiler ON State: Indicates when the heating/cooling system is active.
• Symbol for Timed Control: Indicates that a programmed schedule is active.

6.2 Socrú an Ama agus an Lae Reatha

1. Brúigh an AMACH cnaipe.
2. Bain úsáid as an + or - cnaipí chun an uair a choigeartú, ansin brúigh AMACH arís a dheimhniú.
3. Repeat for minutes and day of the week.

6.3 Coigeartú Teochta de Láimh

1. I ngnáthmhód oibriúcháin, brúigh an + or - cnaipí chun an teocht atá ag teastáil a choigeartú.
2. The new temperature will be maintained until the next programmed time slot or until manually overridden again.

6.4 Programming Daily/Weekly Schedules

The Q7RF allows for independent programming for each day of the week. You can typically set multiple time periods with different temperatures for each day.

1. Brúigh an PROG cnaipe chun modh ríomhchlárúcháin a chur isteach.
2. Bain úsáid as an LÁ button to select the day you wish to program (e.g., MON, TUE, etc.).
3. Bain úsáid as an AMACH agus +/- buttons to set the start time for the first program period.
4. Bain úsáid as an SET TEMP agus +/- buttons to set the desired temperature for this period.
5. Brúigh PROG again to move to the next program period for the same day, or use LÁ chun bogadh go dtí an lá dár gcionn.
6. Repeat until all desired periods and days are programmed.
7. Brúigh an Rith or Scoir cnaipe chun sábháil agus imeacht as mód ríomhchlárúcháin.

7. Cothabháil

7.1 Athsholáthar Ceallra

When the low battery symbol appears on the LCD display, replace the batteries immediately to ensure continuous operation. Use new, high-quality alkaline batteries of the specified type.

1. Open the battery compartment cover on the back of the thermostat unit.
2. Bain na cadhnraí d'aois.
3. Insert new batteries, observing correct polarity (+/-).
4. Dún an clúdach urrann ceallraí.

7.2 Glanadh

Clean the thermostat and receiver units with a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the units, as this may damage the electronics or finish.

8. Fabhtcheartú

9. Barántas agus Tacaíocht

COMPUTHERM products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or contact your retailer. For technical support, please reach out to the COMPUTHERM customer service or your local distributor. Keep your purchase receipt as proof of purchase.