Geberit PushControl Bathtub Drain and Overflow Unit Model 151.603 Instruction Manual

1. Réamhrá

This manual provides detailed instructions for the installation, operation, and maintenance of your Geberit PushControl Bathtub Drain and Overflow Unit, Model 151.603. This unit is designed for bathtubs with depths ranging from 17 to 24 inches and features a 27-inch stainless steel cable for reliable operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Geberit PushControl system offers a convenient push-button mechanism for opening and closing the bathtub drain, providing a clean and modern aesthetic for your bathroom.

2. Faisnéis Sábháilteachta

RABHADH: Failure to follow these safety instructions could result in property damage, personal injury, or death.

• Always turn off the water supply before beginning any plumbing work.
• Caith trealamh cosanta pearsanta cuí, amhail spéaclaí sábháilteachta agus lámhainní, le linn na suiteála.
• Cinntigh go bhfuil na naisc uile slán agus uiscedhíonach chun sceitheanna a chosc.
• Mura bhfuil tú cinnte faoi aon chuid den phróiseas suiteála, téigh i gcomhairle le pluiméir cáilithe.
• Coinnigh codanna beaga as aimsiú leanaí chun guaiseacha tachtadh a chosc.

3. Ábhar Pacáiste

Deimhnigh go bhfuil na comhpháirteanna uile i láthair sula dtosaíonn tú ar an suiteáil:

• Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603)
• Brass trim (Polished Chrome)
• strainer cruach dhosmálta
• 27" stainless steel cable (Teflon coated)
• Uirlis suiteála
• Gaskets and fasteners

4. Sonraíochtaí

5. Suiteáil

Before you begin, ensure you have all necessary tools and that the water supply to the bathtub is turned off. Refer to local plumbing codes for specific requirements.

5.1 Uirlisí Riachtanach

• Púitín pluiméir nó séalaithe silicone
• Adjustable wrench or channel locks
• Scriúire (Phillips agus Flathead)
• Téip tomhais
• Gloiní sábháilteachta agus lámhainní

5.2 Suiteáil Céim ar Chéim

1. Ullmhaigh an Folctha: Ensure the bathtub drain and overflow holes are clean and free of debris. The overflow hole should be between 2" and 2-1/2" in diameter.
2. Install the Drain Shoe: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the bathtub drain hole from the inside of the tub. From underneath the tub, attach the drain shoe assembly, ensuring the gasket is properly seated. Tighten securely with an adjustable wrench.
3. Install the Overflow Assembly: Position the overflow gasket on the back of the overflow plate. Insert the overflow pipe assembly into the overflow hole from the outside of the tub. Align the overflow plate with the overflow hole from the inside of the tub and secure it with the provided screw. Ensure the cable is routed correctly and not kinked.
4. Ceangail an Cábla: Connect the 27" stainless steel cable to both the drain stopper mechanism and the PushControl overflow trim. Follow the specific instructions provided with the unit for proper cable attachment and adjustment. The installation tool included will assist with this step.
5. Connect to Waste Pipe: Connect the 1-1/2" tubular piping of the drain and overflow unit to your existing waste pipe system. Ensure all connections are tight and sealed to prevent leaks.
6. Tástáil le haghaidh sceitheadh: Fill the bathtub with water and check all connections for any signs of leakage. Operate the PushControl mechanism several times to ensure the drain stopper opens and closes smoothly.

Image 1: Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603) showing the polished chrome trim and cable assembly. This image illustrates the main components of the unit.

6. Oibríocht

The Geberit PushControl system is designed for simple and intuitive operation.

• Chun an Draein a Dhúnadh: Firmly press the center of the overflow trim plate. The drain stopper will move into the closed position, allowing the tub to fill with water.
• Chun an Draein a Oscailt: Firmly press the center of the overflow trim plate again. The drain stopper will release, allowing water to drain from the tub.

Ensure the mechanism operates smoothly. If you experience resistance, refer to the Troubleshooting section.

7. Cothabháil

Regular cleaning and maintenance will ensure the longevity and proper function of your Geberit PushControl unit.

• Cleaning the Trim: Clean the polished chrome trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Cleaning the Drain: Periodically remove the drain stopper and clean any hair or debris that may have accumulated in the drain opening.
• Cigireacht Cábla: Annually inspect the stainless steel cable for any signs of wear or damage. While the cable is Teflon coated for durability, extreme conditions or improper use can cause wear.

8. Fabhtcheartú

If problems persist after attempting these solutions, please contact Geberit customer support or a qualified plumber.

9. Barántas agus Tacaíocht

Geberit products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Geberit websuíomh.

For technical assistance, replacement parts, or further support, please contact Geberit customer service:

• Websuíomh: www.geberit.com
• Seirbhís do Chustaiméirí: Féach ar an Geberit websuíomh le haghaidh eolas teagmhála réigiúnach.

Agus tú ag teagmháil leis an tacaíocht, bíodh uimhir mhúnla do tháirge (151.603) agus dáta an cheannaigh ar fáil agat.