Réamhrá
The Technoline WS 9140-IT is a temperature station designed for monitoring both indoor and outdoor temperatures. It features a DCF-77 radio-controlled clock for automatic time synchronization, an alarm with snooze function, and records minimum and maximum temperature values. This device can be conveniently placed on a table or mounted on a wall.
Ábhar an Phacáiste
Please check that all components are present in the package:
- 1 x WS 9140-IT Base Station
- 1 x TX37-IT Outdoor Sensor
- Lámhleabhar Úsáideora (an doiciméad seo)
Táirge Tharview
The Technoline WS 9140-IT consists of a main base station and a wireless outdoor sensor. The base station displays time, indoor temperature, and outdoor temperature. It also features control buttons for settings and functions.
Fíor 1: Technoline WS 9140-IT Temperature Station and its packaging.
Fíor 2: Tosaigh view of the base station and the outdoor sensor, showing display elements and technical specifications.
Base Station Display Elements:
- Taispeáint Ama: Shows current time, synchronized via DCF-77 radio signal.
- Teocht faoi Dhíon: Displays the temperature measured by the base station.
- Teocht Lasmuigh: Displays the temperature received from the wireless sensor.
- MIN/MAX Indicators: Shows recorded minimum and maximum temperatures.
- Táscaire Battery: Alerts when batteries are low.
Cnaipí Rialaithe:
- SET: Enters setting mode.
- ALARM: Activates/deactivates alarm and enters alarm setting mode.
- MIN/MAX RESET: Displays minimum/maximum values and resets them.
- '+' / '-': Adjusts values during setting or changes display options.
Socrú
1. Suiteáil Battery
For the Outdoor Sensor (TX37-IT):
- Open the battery compartment cover on the back of the outdoor sensor.
- Insert 2 x AA Mignon LR06 batteries, observing the correct polarity (+/-).
- Dún an clúdach urrann ceallraí go daingean.
For the Base Station (WS 9140-IT):
- Open the battery compartment cover on the back of the base station.
- Insert 2 x AA Mignon LR06 batteries, observing the correct polarity (+/-).
- Dún an clúdach urrann ceallraí go daingean.
Note: Always insert batteries into the outdoor sensor first, then into the base station to ensure proper synchronization.
2. Socrúchán Braiteoir
Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, to ensure accurate temperature readings. The maximum transmission distance is 100 meters in open air. Avoid placing it near large metal objects or electrical appliances that may interfere with the signal.
3. Initial Synchronization (DCF-77 Radio Clock)
After battery installation, the base station will automatically begin searching for the DCF-77 radio signal. This process may take several minutes. Once the signal is received, the time will be set automatically. A radio tower icon will appear on the display, indicating successful synchronization.
4. Manual Time Setting (Optional)
If the radio signal is not available or if you prefer to set the time manually:
- Brúigh agus coinnigh an SET an cnaipe go dtí go splancfaidh na digití uair an chloig.
- Bain úsáid as an '+' or '-' cnaipí a choigeartú an uair an chloig.
- Brúigh SET again to confirm and move to minute setting.
- Úsáid '+' or '-' chun na miontuairiscí a choigeartú.
- Brúigh SET to confirm and exit manual time setting.
5. Coigeartú Crios Ama
To adjust for different time zones (± 12 hours):
- I mód taispeána gnáth-ama, brúigh agus coinnigh an SET an cnaipe go dtí go splancfaidh na digití uair an chloig.
- Brúigh SET repeatedly until the time zone offset (e.g., '00') flashes.
- Bain úsáid as an '+' or '-' buttons to adjust the time zone offset.
- Brúigh SET a dheimhniú agus imeacht.
Treoracha Oibriúcháin
1. Léamh Teochta
The current indoor and outdoor temperatures are continuously displayed on the base station's screen.
2. Minimum/Maximum Temperature Recording
The station automatically records the minimum and maximum indoor and outdoor temperatures since the last reset.
- Brúigh an MIN/MAX RESET button once to display the maximum recorded temperatures.
- Brúigh an MIN/MAX RESET button a second time to display the minimum recorded temperatures.
- Brúigh agus coinnigh an MIN/MAX RESET button to clear the recorded minimum and maximum values. The display will show the current temperatures, and new min/max values will begin recording.
3. Alarm Setting and Snooze Function
Socrú an Aláraim:
- Brúigh an ALARM button once to display the alarm time.
- Brúigh agus coinnigh an ALARM an cnaipe go dtí go mbeidh na digití uair an chloig aláraim ag splancadh.
- Bain úsáid as an '+' or '-' cnaipí chun an uair aláraim a choigeartú.
- Brúigh ALARM again to confirm and move to alarm minute setting.
- Úsáid '+' or '-' chun nóiméid an aláraim a choigeartú.
- Brúigh ALARM chun socrú aláraim a dhearbhú agus a fhágáil.
An Aláram a Ghníomhachtú/Díghníomhachtú:
- I mód taispeána gnáth-ama, brúigh an ALARM button repeatedly to toggle the alarm ON or OFF. An alarm icon will appear on the display when the alarm is active.
Feidhm Snooze:
- When the alarm sounds, press any button (except ALARM) to activate the snooze function. The alarm will sound again after approximately 5 minutes.
- To stop the alarm completely, press the ALARM button when it is sounding.
4. Táscaire Battery Íseal
A low battery icon will appear on the display when the batteries in either the base station or the outdoor sensor need to be replaced. Replace all batteries promptly to ensure continuous operation and accurate readings.
Cothabháil
1. Athsholáthar Ceallraí
When the low battery indicator appears, replace the batteries in both the base station and the outdoor sensor. Use 2 x AA Mignon LR06 batteries for each unit. Ensure correct polarity during installation.
2. Glanadh
Cuimil na haonaid le clúdach bog, damp éadach. Ná húsáid glantóirí scríobacha ná tuaslagóirí, mar d’fhéadfadh siad seo damáiste a dhéanamh don taispeáint nó don casing. Ensure the units are dry before re-inserting batteries or operating.
Fabhtcheartú
| Fadhb | Cúis Féideartha | Réiteach |
|---|---|---|
| No outdoor temperature display or '---' | No signal from outdoor sensor; Batteries in sensor are low or incorrectly inserted; Sensor too far from base station or obstructed. | Check sensor batteries and polarity. Move sensor closer to base station. Avoid obstructions like thick walls or metal objects. Re-synchronize by removing and re-inserting batteries in both units (sensor first). |
| Taispeáint ama mícheart | DCF-77 signal not received; Incorrect time zone setting. | Ensure base station is placed away from electronic interference. Allow time for automatic synchronization. Manually set time or adjust time zone if necessary. |
| Tá an taispeáint dim nó bán | Low batteries in base station. | Replace batteries in the base station. |
| Ní chloiseann an t-aláram | Alarm is not activated; Alarm time is incorrectly set. | Ensure the alarm icon is visible on the display. Verify the alarm time setting. |
Sonraíochtaí
- Múnla: WS 9140-IT
- Branda: Teicneolaíocht
- Base Station Dimensions (L x W x H): 73 x 25 x 158 mm
- Outdoor Sensor Dimensions (L x W x H): 38 x 21 x 128 mm
- Base Station Power: 2 x AA Mignon LR06 batteries (not included)
- Outdoor Sensor Power: 2 x AA Mignon LR06 batteries (not included)
- Raon Teochta faoi Dhíon: -10°C go +40°C
- Raon Teochta Lasmuigh: -40°C go +60°C
- Minicíocht Tarchuir: 868 MHz
- Fad Tarchuir: Suas le 100 méadar (páirc oscailte)
- Gnéithe Speisialta: DCF-77 Radio-controlled clock, Manual time setting option, Time zone adjustment (± 12 h), MIN/MAX temperature memory, Alarm with snooze function, Low battery indicator, Wall mount or table stand.
- Ábhar: Plaisteach
Fíor 3: The Technoline WS 9140-IT base station can be wall-mounted for convenient viewing.
Barántas agus Tacaíocht
Specific warranty information and detailed support contacts are not provided in the product data. For warranty claims or technical assistance, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. You may also visit the official Technoline websuíomh le haghaidh faisnéise tacaíochta ginearálta.